Dorian Tool ER25STWR Standard Wrench for Standard ER25 Collet-Nuts
- Dorian tool er standard wrench for use with standard er25 collet-nuts.
CycleMore Super Precision 1/2″ ER25 ER-25 Spring Collet for CNC Engraving Machine & Milling Lathe Tool
- 100% brand new and high quanlity. For cnc milling lathe tool & workholding engraving machine. Good elasticity, high precision, run-out tolerance0012mm(00005″). Materialhigh grade 65mn. Using high quality spring steel is stable in perfomance.
ETM ER-25 Collet – Series: ER25 Size: 21/64″, 11/32″
- 16 jaws giving powerful gripping & parallel clamping. Unique 8° taper design affords highest gripping power. True double angle, for extreme concentricity. Wide holding range of 1mm (0394″) collapse.
WR-ER25MNWRENCH FOR ER25 COLLET CHUCKS – USING MINI-NUT
- Taper morse taper 2, mt2. 1 mt2 collets holder, 15pcs er25 collets, 1 wrench. Back bar thread m10 x 150p. Collets size (in inch) 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8. Alloy steel and hardened to hrc 60-62 tested tir 00001″.
ETM ER-25 Collet – Series: ER25 Size: 9/16″, 37/64″
- Wide holding range of 1mm (0394″) collapse. True double angle, for extreme concentricity. 16 jaws giving powerful gripping & parallel clamping. Unique 8° taper design affords highest gripping power.
KISENG 16pcs ER25 1mm to 16mm Chuck Collet Spring Collet Set For CNC Milling Lathe Tool (ER25 16pcs)
- ▲ can be for gripping the drill, boring knife, chisel, reamers and other tools. ▲ Gripping range1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm. ▲ Tir 00003″ or 5um in order to make all collets running true, on your side, make sure your machine spindle and chuck holder running true on my side, i’ll make sure all those collets running in tenth. ▲ High accuracy and ease of operation. ▲ Use high-quality carbon steel, after heat treatment, has good flexibility and abrasion resistance.
Z-COLOR 15pcs 2-16mm ER25 Spring Collet Set CNC Workholding Engraving&Milling Lathe Tool
- 100% brand new and high quanlity. Material manganese steel. Good elasticity, high precision, run-out tolerance 0012mm(00005″). For workholding engraving machine & cnc milling lathe tool. Model er25(15pcs,2mm-16mm).
ER25 Spring Collet Set 1/16″ – 5/8″ 15 Pc Set
- This set has spring collets of the following size 1/16 inch, 3/32 inch, 1/8 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch, 11/32 inch,3/8 inch, 13/32 inch, 7/16 inch, 1/2 inch, 17/32 inch, 9/16 inch, 5/8 inch. These collets have a unique 8 degree taper and a 16 jaw for powerful grip.
CNBTR 40CR Metal Silver Precision Back Pull Morse Taper Shank Milling Collet Chuck Holder with Flat Tail (MTA2-ER25)
- Milling chucks in vitro stability precision grinding, can eliminate unbalance,and increased cutting. It can reduce the use of longer tools, which can reduce costs, improve efficiency. Tighten the nut straight, high rigidity, and strong clamping. Suitable for morse taper milling spindle hole.
TECHNIKS 22247 CAT40 ER25 COLLET CHUCK SLOT NUT TOOL HOLDER X 6″ LENGTH
- Tir 00001″ measured from taper to collet pocket. Balanced to 25,000 rpm at g25. Taper ground to at3 accuracy for maximum contact with spindle. Our part # tec-22247. Dimensions for length (l1) 6″ and diameter (d) 165″.
CNC Milling Collet Chuck – TOOGOO(R)ER25 MT2 M10 CNC Collet Chuck Holder Milling Collet Chuck drawbars
- Toogoo(r)er25 mt2 m10 cnc collet chuck holder milling collet chuck drawbarspackage included1 x er25 mt2 collet chucknotelight shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm. Toogoo is a registered trademark. Our products will enhance your experience to unparalleled inspiration. Only authorized seller of toogoo can sell under toogoo listings.
CAT50 ER25 Collet Chucks 2 Pcs w Projection 4″-6″ Balanced G2.5 @10,000 RPM
- Balanced to g25 @10,000 rpm tested tir 00001″. Package includes 1pc cat50 er25 collet chuck with projection 4″ and 1pc cat50 er25 collet chucks with projection 6″. Made of prime quality alloy steel and hardened to hrc 60-62.
LAYs ER25 Spring Collet Alloy for CNC Milling Lathe Tool Engraving Machine (ER25-13)
- Gripping range 2mm to 16mm. Made of high grade specially formulated spring steel hardened and precision ground built in self-release design and tools will never get stuck in holder. Total height 34mm outer diameter(max) 25mm. Hardness 46-50hrc standard din6499b accuracy 0005mm. This is a precision collets for professionals and hobbyists demanding ease of operation and high quality work results.
TECHNIKS 3/16″ SUPER PRECISION ER25 COLLET .0002 ACCURACY CNC CHUCK MILL
- Clamping range 148-187″. Precision ground and hand inspected only the very best materials and grinding techniques used. The most accurate er25 collet in the industry- average 00002″ total indicated runout (tir). Our part # tec-04225-3/16.
MT3 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder
- 1 mt3 collets holder, 15pcs er 25collets, 1 wrench. Taper morse taper 3, mt3. Back bar thread m12 x 175p. Alloy steel and hardened to hrc 60-62 tested tir 00001″. Collets size 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8 inch.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
