Top 16 Best Morse Taper Shanks

 

12 Expanding Arbor with 1 Morse Taper Shank

1/2″ Expanding Arbor with #1 Morse Taper Shank

1/2″ Expanding Arbor with #1 Morse Taper Shank - Expanding machinable arbor working diameter is 1/2″ (. 500) designed to expand up to. 010 inches working length is 2-5/8 inches mounting shank is #1 morse taper with a 1/4-20″internal thread for draw bars” made from 12l14 soft machinable steel.

 

Union Butterfield 430 Drift Key for Morse Taper Shank 2 Black Oxide Finish

Union Butterfield 430 Drift Key for Morse Taper Shank 2, Black Oxide Finish

Union Butterfield 430 Drift Key for Morse Taper Shank 2, Black Oxide Finish - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Hardened and ground.

 

Precision Twist 209 High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″ - Morse taper shank, for a secure and accurate tool-holding system. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. 118-degree conventional point angles for general drilling applications. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. High-speed steel (hss), for use on a wide variety of materials.

 

Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 4964 to 1 in 164 Increments

Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64″ to 1″ in 1/64″ Increments

Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64″ to 1″ in 1/64″ Increments - Made in usa. Index holds morse taper shank or taper length drill bits with a straight shank in sizes 49/64″ to 1″ in 1/64″ increments. Labeled storage holes for identification and organization. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection.

 

3MT TO 6JT DRILL CHUCK ARBOR HARDENED MT3 JT6 JACOBS MORSE TAPER SHANK

3MT TO 6JT DRILL CHUCK ARBOR HARDENED MT3 JT6 JACOBS MORSE TAPER SHANK

3MT TO 6JT DRILL CHUCK ARBOR HARDENED MT3 JT6 JACOBS MORSE TAPER SHANK - Made of precision ground, high grade tool steel. Our part # all-49532. Morse taper #3 (3mt) to jacobs taper #6 (6jt). Arbor will fit all drill chucks that with a 6jt bore and will fit on any machine tool with a 3mt spindle this arbor has a 3/8-16 drawbar thread. Long end is 3mt, short end is 6jt.

 

Drill America DEWA0203 Qualtech Drill Chuck Arbor 2 Morse Taper Shank To 3 Jacobs Taper Pack of 1

Drill America DEWA0203 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)

Drill America DEWA0203 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #3 Jacobs Taper (Pack of 1) - #2 morse taper shank to #3 jacobs taper. Drill america qualtech drill chuck arbor. .

 

SL2-2 2 Morse Taperhole-2 Morse Tapershank Extension Socket

SL2-2 2 Morse Taper(hole)-2 Morse Taper(shank) Extension Socket

SL2-2 2 Morse Taper(hole)-2 Morse Taper(shank) Extension Socket - Extends a morse taper tool from the spindle. Soft with hardened tang. Inside (hole) 2 morse taper. Outside (shank) 2 morse taper. Overall length 6 7/8″.

 

1MT TO 2JT DRILL CHUCK ARBOR HARDENED MT1 JT2 JACOBS MORSE TAPER SHANK

1MT TO 2JT DRILL CHUCK ARBOR HARDENED MT1 JT2 JACOBS MORSE TAPER SHANK

1MT TO 2JT DRILL CHUCK ARBOR HARDENED MT1 JT2 JACOBS MORSE TAPER SHANK - Made of precision ground, high grade tool steel. Our part # all-49504. Morse taper #1 (1mt) to jacobs taper #2 (2jt). Long end is 1mt, short end is 2jt. Arbor will fit all drill chucks that with a 2jt bore and will fit on any machine tool with a 1mt spindle this arbor has a 1/4-20 drawbar thread.

 

Alvord Polk 625-0 High-Speed Steel Bridge Reamer Straight Flute 2 Morse Taper Shank Uncoated Finish Size 58 Inch

Alvord Polk 625-0 High-Speed Steel Bridge Reamer, Straight Flute, #2 Morse Taper Shank, Uncoated Finish, Size 5/8 Inch

Alvord Polk 625-0 High-Speed Steel Bridge Reamer, Straight Flute, #2 Morse Taper Shank, Uncoated Finish, Size 5/8 Inch - Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness. Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not). The end of morse taper shank tools (held in a toolholder) is tapered to ensure accurate alignment of the tool in its socket and is self-holding (friction between the tool and the tool-holder prevents slippage). High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide. Uncoated (bright) tools have no finish or coating they are a good choice for general purpose applications.

 

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit Black Oxide Finish 3 Morse Taper Shank Spiral Flute 118 Degrees Notched Point 1316 Size 10-34 Length Pack of 1

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 13/16″ Size, 10-3/4″ Length (Pack of 1)

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 13/16″ Size, 10-3/4″ Length (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. It features coolant passages throughout the length of the body. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill America DEW4MT Qualtech Live Center 4 Morse Taper Shank Pack of 1

Drill America DEW4MT Qualtech Live Center, #4 Morse Taper Shank (Pack of 1)

Drill America DEW4MT Qualtech Live Center, #4 Morse Taper Shank (Pack of 1) - #4 morse taper shank. Drill america qualtech live center.

 

SL2-1 2 Morse Taperhole-1 Morse Tapershank Extension Socket

SL2-1 2 Morse Taper(hole)-1 Morse Taper(shank) Extension Socket

SL2-1 2 Morse Taper(hole)-1 Morse Taper(shank) Extension Socket - Overall length 6 1/4″. Allows the use of a larger morse taper tool. Inside (hole) 2 morse taper. Soft with hardened tang. Outside (shank) 1 morse taper.

 

Drill America DEWA0303 Qualtech Drill Chuck Arbor 3 Morse Taper Shank To 3 Jacobs Taper Pack of 1

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1) - #3 morse taper shank to #3 jacobs taper. Drill america qualtech drill chuck arbor.

 

3MT TO 2JT DRILL CHUCK ARBOR HARDENED MT3 JT2 JACOBS MORSE TAPER SHANK

3MT TO 2JT DRILL CHUCK ARBOR HARDENED MT3 JT2 JACOBS MORSE TAPER SHANK

3MT TO 2JT DRILL CHUCK ARBOR HARDENED MT3 JT2 JACOBS MORSE TAPER SHANK - Made of precision ground, high grade tool steel. Morse taper #3 (3mt) to jacobs taper #2 (2jt). Our part # all-49528. Long end is 3mt, short end is 2jt. Arbor will fit all drill chucks that with a 2jt bore and will fit on any machine tool with a 3mt spindle this arbor has a 3/8-16 drawbar thread.

 

Drill America DEWES4-2 Qualtech Extension Socket 2 Morse Taper Shank 4-2 Size Pack of 1

Drill America DEWES4-2 Qualtech Extension Socket, #2 Morse Taper Shank, 4-2 Size (Pack of 1)

Drill America DEWES4-2 Qualtech Extension Socket, #2 Morse Taper Shank, 4-2 Size (Pack of 1) - . Drill america qualtech extension socket. 4 hole size. #2 morse taper shank.

 

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish Morse Taper Shank Spiral Flute 135 Degree Point Angle 2332

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″ - Long length drill bits (also called taper length) have longer flutes and overall lengths than jobber drill bits. Morse taper shank, for a secure and accurate tool-holding system. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Gold oxide to retain cutting fluid and prevent chip to tool welding. 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges.