Rockler Complete Dovetail Jig
- Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig rockler’s exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. Preset template and fence locations clearly marked for standard thickness stock. Jig will cut half-blind dovetailed joints from 1/2″ to 1-1/8″ thick and full through dovetails from 3/8″ to 3/4″ thick. Complete dovetail jig includes two durable phenolic templates three 8mm shank carbide-tipped router bits (1/2″ x 14° dovetail, 1/2″ x 8° dovetail, 5/16″ straight) 1/2″ to 8mm collet adapter 7/16″ guide bushing fits most routers detailed eight-page instruction booklet quick reference guide for standard joints. Accommodates stock up to 11″ wide. And our new preset template guide allows for quick initial setup for 1/2″ to 3/4″ thick stock. Depth gauge on template for setting dovetail bit height for half-blind joints. 8mm diameter bits are 25% larger than typical 1/4″ bits, reduce chatter and fit all existing rockler dovetail jigs. Clamping bars include abrasive surface to grip stock and prevent slipping. Requires router with 1/2″ collet. Requires a router base plate that accepts template guide bushings.
CLARKE 12 DOVETAIL JIG JOINTER by Clarke International
- Large clamp knobs and our unique sliding clamp pads exert tremendous holding power and adjust quickly. Lifetime guarantee against defects in material or workmanship made by woodhaven in the usa. Includes our 61780 carbide tipped 14º dovetail bit it’s a bearing guided bit with 1/2″ cut dia, 2-3/8″ overall length with a 5/8″ bearing on its 1/4″ shank jig includes a bit height setup gauge. Ready to use out of the box. Clarke 12 dovetail jig jointer.
Keller Dovetail System 135-1500 Journeyman DoveTail Jig
- Accepts unlimited widths and lengths. Accepts wood from 1/8 to 3/4 inches thick. 15-inch precision-milled template. Back-to-back model. No test cuts, no wasted wood.
Woodtek 122471, Portable Power Tool Accessories, Dovetail Jigs, 12″ Dovetail Jig
- Dovetail joinery for drawers and more. Handles 5/16″ to 1-1/4″ thick stock, mounts to workbench using screws or clamps. Adjustable knobs and stops make setup simple, comes with 1/2″ cnc machined aluminum template. Approximately 6-3/4″h x 17″w x 11″d, weighs 21 lbs. Imported. Does not cut “through” dovetail joints. The woodtek® 12″ dovetail jig features cam action clamping to securely hold work pieces in place during routing by providing a predetermined offset, male and female cuts can be made at the same time for greater accuracy.
Taytools Solid Brass Dovetail Marking Jig Dovetail Marker for Stock up to 1″ Thick with Slopes 1:5 (softwoods) and 1:8 (hardwoods). DTSB5-8
- It will mark dovetails in stock up to 1 inch thick in both 15 and 18 slopes. Template portion is cnc machined made from solid brass. Slope markings photoetched. Complete layout lines for hand cut dovetails with precision and easy with this compact solid brass dovetail marker.
Leigh Super 18″ Dovetail Jig
- A simple twist of the e-bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails. Very precise adjustments for fit are made easily with the e-bush. Includes 1/2″-8 degree dovetail bit, 1/2″-14 degree dovetail bit, 5/16″ straight bit, 1/2″ to 8mm collet reducer, sliding dovetail fence, half-blind bridge piece material, e-bush, fully illustrated user guide and instructional dvd. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″. Markings clearly indicate the adjustment direction necessary for the desired change. The amazing joint making capability of super jigs is due in part to the revolutionary new leigh e-bush. No other jigs equal the versatility and precision of leigh super jigs. Rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass with the super jigs, you’re not limited to one bit and one depth of cut. Settings are changed using the included pin wrench and the uniquely shaped locking nut makes tightening the e-bush a snap. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, guaranteeing a half pin at each edge of the joint, regardless of board width. Variably spaced through and half-blind dovetails are standard on all super jigs. Easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non-slip material applied to each clamping surface. Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. The cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template. Super jigs offer extraordinary joint making capability at exceptional price points.
Leigh Super 18″ Dovetail Jig With Accessory Kit
- Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. The amazing joint making capability of super jigs is due in part to the revolutionary new leigh e-bush. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″. Super jigs offer extraordinary joint making capability at exceptional price points. With the super jigs, you’re not limited to one bit and one depth of cut. Settings are changed using the included pin wrench and the uniquely shaped locking nut makes tightening the e-bush a snap. Markings clearly indicate the adjustment direction necessary for the desired change a simple twist of the e bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non slip material applied to each clamping surface includes 1/2″-8 degree dovetail bit, 1/2″-14 degree dovetail bit, 5/16″ straight bit, 1/2″ to 8mm collet reducer, sliding dovetail fence, half-blind bridge piece material, e-bush, fully illustrated user guide and instructional dvd. Very precise adjustments for fit are made easily with the e-bush. Variably spaced through and half-blind dovetails are standard on all super jigs infinitely adjustable one-piece fingers are easily positioned for any joint pattern, guaranteeing a half pin at each edge of the joint, regardless of board width cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass. Also includes leigh super jig accessory kit containing vacuum & router support and 7-piece leigh router bit set.
MLCS 6406 Pins and Tails Half Blind Dovetail Jig Set
- This solid aluminum template and steel jig is machined precisely for creating strong and secure half blind dovetail joints or half-blind rabbeted dovetail joints. 5/8″ router guide bushing (not included) is required. 14 degree dovetail bit (1/4″ shank) included. Detailed instruction manual guides you from initial setup through final assembly. Since you cut both sides of the half-blind dovetail joint at the same time, a perfect fit is assured for this joint. Works for 1/2″ to 1″ drawer sides and 5/8″ to 1″ drawer fronts (up to 12″ in width). The solid aluminum template is cnc machined. Self-spacing edge guides allow proper offset for precise joint alignment. The steel beams secure both work pieces snugly. This is the perfect solution for sturdy boxes and drawers with the classic dovetail joint design.
PORTER-CABLE 4212 12″ Deluxe Dovetail Jig
- Durable, single-piece steel base design requires no assembly (view larger). Able to accommodate stock from 1/4 to 1-1/8 inch thick, this jig’s heavy-duty cam-type clamps with sandpaper-backed locking bars provide a firm grip of wood. It’s also covered by porter-cable’s one-year free service contract, where porter-cable will maintain the tool and replace worn parts caused by normal use–for free. Warranty this porter-cable tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). What’s in the box porter-cable 4212 dovetail jig combination kit with jig base two templates (4211 and 4213) two router bits (43776pc and 43743pc) two template guides ( 42040 and 42046) two lock nuts wrench operating instructions on-board instructions provide clear guidance for various applications (router not included view larger). On-board instructions provide clear user guidance for the various applications and machined aluminum templates provide superior cutting accuracy and long-term durability. 4212 dovetail jig combination kit at a glance includes 12-inch dovetail jig plus two templates template alignment lines and router bit depth gauges allow for quick, easy set-up durable, single-piece steel base design requires no assembly clamps or bolts directly to work bench accommodates stock from 1/4- to. This package includes a template 4211 for half-blind, rabbeted half-blind and sliding dovetails and the 4213 template for through dovetails and box joints. Ideal for woodworking, furniture and cabinet making, the porter cable 4212 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes and furniture. Its router bit depth gauge allows users to set bit depths without measuring and its durable, single-piece steel base design requires no assembly and allows clamping or bolting directly to the work bench.
Trend CDJ300 12-Inch Half-blind Dovetail Jig
- Specifications rating craftsman. Workpiece thickness min 12 mm. Workpiece thickness max 25 mm. It cuts 12. Router base dia. 7 mm (½ inch) wide half blind dovetails or rebated dovetails in one operation. Supplied with 1 x 1/4in shank tct 104º dovetail cutter. Trend craft dovetail jig 300mm trecdj300 the trend cdj300 craft dovetail jig is an accurate and easy-to-use for a variety of elegant dovetail joints. Max 180 mm. Dovetail size 12. Workpiece width max 300 mm. 1 x 15. 8mm guide bush. Guide bush size 15. Trecdj300. 7 mm. Please note a unibase and fine height adjuster may be required for certain makes of router. 8 mm. The cdj300 is precision made laser cut zinc plated steel template with packing piece.
PRAZI PR-3900 ChestMate Dovetail Jig
- Chestmate woodcrafter’s joinerthe unique and versatile joinery system. , Project boards can be as large as you’d like. Simple instructions included tools required 1/4-inch or 1/2-inch router with 6-inch diameter base 5/8-inch diameter follower bushing 3/4-inch 14-degree dovetail cutter bit 5/16-inch straight cutter bit bench vise and cl-amps. Designed for stock thickness of 1/2-inch-1-inch. Creates 3/4-inch 14-degree through dovetails. Create your own patter of dovetail arrangements. , Spacing dimension between pins and tails is not limited. Includes indexing guide and pin guide.
Leigh Accessory Kit for Super 24″ Dovetail Jig
- Leigh’s ingenious vrs provides router support and dust-free routing. Includes 1/4″ x 8 degree dovetail 5/16″ x 8 degree dovetail 3/8″ x 8 degree dovetail 7/16″ x 8 degree dovetail 1/2″ x 10 degree dovetail 1/2″ x 12 degree dovetail 1/2″ x 18 degree dovetail. . The 7-piece set features 8mm shank bits. Leigh super jig accessory kits include a vacuum and router support (vrs) and 7-piece boxed leigh router bit set.
Leigh D4R-PRO Dovetail Jig
- One of the best just got better the new d4r-24 jig features a one piece aluminum extrusion base with machined-in non marring textured clamping surfaces and machined-in side stops on the top and front of the jig body. Like its predecessor, the d4r easily produces handmade looking dovetail pins and tails. Perfect fitting joints for tiny boxes or large case pieces can be produced in a variety of patterns by simply changing the adjustable guide fingers. Accepts boards up to 24″ wide. The top side stops have a 3/8″ recess for rabbeted boards. Also included is a 1/2″ to 8mm collet reducer and a 7/16″ template guide bushing, a comprehensive instruction manual and instructional dvd. Includes three carbide router bits, a 1/2″ d x 8° x 8mm dovetail bit and a 5/16″ x 1″ x 8mm straight bit for through dovetails, and a 1/2″ d x 14° x 8mm dovetail bit for half blind dovetails. Wooden pieces are clamped into the jig quickly and easily with the cam action clamps which can be adjusted for different stock thickness in seconds, or used to repeat the same clamp tension instantly. Maximum pin thickness 11/4″. Jigs are meticulously engineered and constructed. Through or half blind dovetails can be easily set up by simply flipping the finger assembly over.
Dovetail Jig Router Bit Set By Peachtree Woodworking PW3437
- Set includes 5 bits and a brass setup bar in a wooden storage box. Box joint bit, 1/4″ shank, 9/16″ dia x 3/4″ cutting height x 5/8″ od bearing. Mini bit set, 7 degree dovetail bit and 5/8″ straight bit both with 1/4″ shank and 5/8″ bearings. Small bit set, 7 degree dovetail bit and 5/8″ straight bit both with 1/4″ shank and 5/8″ bearings.
Vacuum & Router Support for Leigh Super 12″ Dovetail Jig
- It comes complete with two adaptors to fit all popular vacuum hose sizes from 1″ to 2-1/2″. It can be used with a small shop vacuum or large dust collection system. Easily attaches without jig modification. Chips and sawdust are drawn into the vacuum chute and down through the vacuum hose. The chute is always in the perfect position to catch the chips being thrown out by the high-speed router bit action. The revolutionary leigh vrs (vacuum and router support) is the ultimate waste control and router support for your leigh dovetail jig. All mounting hardware is included. The router is positioned between the adjustable control arms that are fitted to suite any size router base and attached to the vacuum chute below. The vacuum chute glides effortlessly from side to side on nylon rollers and automatically follows the router when routing the joint or when the router is parked off to the side.
15″ Peachtree Dovetail Jig System PW3452
- 1 ea 1/4″ shank, 5/8″ straight bit with bearing and full color instructions. Jig will work with two different thicknesses of stock. Kit includes 1 ea 15″ aluminum dove jig, 1 ea 1/4″ shank, 7 degree dovetail bit with bearing. The bits included with the jig will cut dovetails in stock from 1/2″ to 3/4″ thick. Precision milled tabs on both ends for connecting another jig.
Keller Dovetail System 135-2200 Journeyman DoveTail Jig Template
- The keller dovetail system journeyman dovetail jig template is ideal for small to mid-size projects. It has both traditional and pin dovetail templates, and can cut classic, variable-spaced, acute, obtuse, compound-angled, and curved dovetails, as well as box and knuckle joints. It comes with a phenolic guide, standard dovetail bit, straight bit, ball-bearing template guides, and fully illustrated operating instructions.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
