Top 17 Best Powder-Actuated Tools

 

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case by HILTI

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case by HILTI

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case by HILTI - Blister pack. Hilti 00377607 dx351-bt fully automatic powder-actuated tool with impact resistant case. Designed for high speed and repetitive volume applications. The p3500 is a low velocity semi-automatic 27 caliber tool. Used to install 300 head drive pins, 8 millimeter head drive pins and 1/4-inch, 20 threaded studs up to 3-inch length.

 

Hilti DX 35 Semi-Automatic Powder-Actuated Tool - 2506

Hilti DX 35 Semi-Automatic Powder-Actuated Tool – 2506

Hilti DX 35 Semi-Automatic Powder-Actuated Tool – 2506 - 27 caliber short in plastic strips of 10 piston bore 8 mm approvals meets ansi standard a 10. 3 and osha requirements for low velocity tools hilti pn 2506 package includes tool, spare parts package, rubber stabilizer, cleaning kit, hilti spray lubricant, safety glasses and operating instructions in an impact-resistant plastic tool box. Fastener range 1/2 in, 1-1/2 in power source hilti.

 

Hilti DX 460-F10 Fully Automatic Powder-Actuated Fastening Tool - 304386

Hilti DX 460-F10 Fully Automatic Powder-Actuated Fastening Tool – 304386

Hilti DX 460-F10 Fully Automatic Powder-Actuated Fastening Tool – 304386 - 3 and osha requirements for low velocity tools hilti pn 304386 package includes tool, f10 fastener guide, rubber stabilizer, cleaning kit, ear protectors, safety glasses, hilti spray lubricant and operating instructions in an impact-resistant plastic tool box. Fastener range all ewh10/w10 3/8″ threaded studs ds fasteners 3/4 in, 2-1/2 in power source hilti. 27 caliber short in plastic strips of 10 piston bore 10mm approvals meets ansi standard a 10.

 

Hilti DX 860-HSN Fully Automatic Powder-Actuated Tool - 282482

Hilti DX 860-HSN Fully Automatic Powder-Actuated Tool – 282482

Hilti DX 860-HSN Fully Automatic Powder-Actuated Tool – 282482 - High fastening rate can help significantly reduce the time it takes to attach deck to steel. Built in adjustable power regulator for optimal control in achieving reliable fastenings. Work upright for maximum productivity and safety by maintaining situational awareness. Magazine for 40 non-stop fastenings, up to 1000 fastenings per hour.

 

Hilti DX 351-CT Fully Automatic Powder-Actuated Tool - 3442190

Hilti DX 351-CT Fully Automatic Powder-Actuated Tool – 3442190

Hilti DX 351-CT Fully Automatic Powder-Actuated Tool – 3442190 - 27 caliber short in plastic strips of 10 piston bore 8 mm hilti pn 3442190 package includes tool and operating instructions in an impact-resistant plastic tool box, plus x-pt ct-351 grip section and x-pt ct-351 3 ft extension tube. Fastener range max 1-1/4 in fasteners x-cw, x-cc27 power source hilti. .

 

Hilti DX 460-MX Fully Automatic Powder-Actuated Fastening Tool - 370448

Hilti DX 460-MX Fully Automatic Powder-Actuated Fastening Tool – 370448

Hilti DX 460-MX Fully Automatic Powder-Actuated Fastening Tool – 370448 - The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers. This tool meets ansi standard a 103, as well as osha requirements for low velocity tools. The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool. This fully automatic powder-actuated fastening tool is perfect for many applications, fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap.

 

Hilti DX 460-IE Fully Automatic Powder-Actuated Tool - 377791

Hilti DX 460-IE Fully Automatic Powder-Actuated Tool – 377791

Hilti DX 460-IE Fully Automatic Powder-Actuated Tool – 377791 - 3 and osha requirements for low velocity tools hilti pn 377791 package includes tool, cleaning kit, ear protectors, safety glasses, hilti spray lubricant and operating instructions in an impact resistant plastic tool box. 27 caliber short cartridges in strips of 10 piston bore 8mm approvals meets ansi standard a 10. Fasteners all x-ie (insulation fasteners) power source hilti.

 

Hilti DX 860-ENP-L Fully Automatic Powder-Actuated Tool - 386793

Hilti DX 860-ENP-L Fully Automatic Powder-Actuated Tool – 386793

Hilti DX 860-ENP-L Fully Automatic Powder-Actuated Tool – 386793 - Work upright for maximum productivity and safety by maintaining situational awareness. Magazine for 40 non-stop fastenings, up to 1000 fastenings per hour. High fastening rate can help significantly reduce the time it takes to attach deck to steel. Built in adjustable power regulator for optimal control in achieving reliable fastenings.

 

Hilti 00377616 DX 351-BTG Semi-Automatic Deluxe Powder-Actuated Grating Tool

Hilti 00377616 DX 351-BTG Semi-Automatic Deluxe Powder-Actuated Grating Tool

Hilti 00377616 DX 351-BTG Semi-Automatic Deluxe Powder-Actuated Grating Tool - Includes tool and an imact resistant tool box. Appropriate for x-bt 8mm threaded stud in high strength steel. Automatic cartridge advance and piston return. No surface coating damage. Low recoil for operator comfort. No through penetration for steel thickness 8 mm and up.

 

Hilti DX 76-MX Semi-Automatic Powder-Actuated Tool - 285794

Hilti DX 76-MX Semi-Automatic Powder-Actuated Tool – 285794

Hilti DX 76-MX Semi-Automatic Powder-Actuated Tool – 285794 - Easy to clean and maintain. Optional single shot fastener guide available for limited access applications. Accessory parts convert tool to the dx 76 hvb for installation of hvb shear connectors in floor deck applications. Curved magazine allows easy access in tight spots and holds 10 fasteners for quick reloading, allowing operator to install up to 600 fasteners per hour. Power regulator for optimal control to achieve optimal fastening quality across a broad application range.

 

Hilti DX 460-GR Fully Automatic Powder-Actuated Tool - 304398

Hilti DX 460-GR Fully Automatic Powder-Actuated Tool – 304398

Hilti DX 460-GR Fully Automatic Powder-Actuated Tool – 304398 - For fastening open catwalk grating and checkerplate to base steel. Total mobility and complete independence from electrical power supplies. Fully automatic piston return and cartridge advance system gives you a higher fastening rate without manually cycling the tool. Up to 120 grating fastenings per hour.

 

Hilti DX 351-BTG Semi Automatic Powder-Actuated Tool - 377616

Hilti DX 351-BTG Semi Automatic Powder-Actuated Tool – 377616

Hilti DX 351-BTG Semi Automatic Powder-Actuated Tool – 377616 - 27 caliber short brown high precision cartridge in strips of 10 piston bore 8 mm approvals meets ansi standard a 10. Fasteners x-bt m8-15-6 sn 12-r (8 mm stainless threaded studs for steel) power source hilti. 3 and osha requirements for low velocity tools hilti pn 377616 package includes tool only in an impact resistant plastic tool box.

 

HIlti 376373 Powder-actuated tool DX 462-HM direct fastening

HIlti 376373 Powder-actuated tool DX 462-HM direct fastening

HIlti 376373 Powder-actuated tool DX 462-HM direct fastening - Meets ansi standard a 103 and osha requirements for low velocity tools. Fasteners x-bt m8-15-6 sn 12-r (8 mm stainless threaded studs for steel). 8 mm piston bore. Power source hilti 27 caliber short cartridges in strips of 10.

 

Hilti DX 351-BT Fully Automatic Powder-Actuated Tool - 377607

Hilti DX 351-BT Fully Automatic Powder-Actuated Tool – 377607

Hilti DX 351-BT Fully Automatic Powder-Actuated Tool – 377607 - Fasteners x-bt w6-24-9 sn12-r (1/4″), x-bt w10-24-6 sn12-r (3/8″ power source hilti. 3 and osha requirements for low velocity tools hilti pn 377607 package includes tool, cleaning kit, ear protectors, safety glasses, hilti spray lubricant, and operating instructions in an impact resistant plastic tool box. 27 caliber short brown high precision cartridge in strips of 10 piston bore 12mm approvals meets ansi standard a 10.

 

Hilti DX 600N Heavy-Duty Single Cartridge Powder-Actuated Tool - 6059

Hilti DX 600N Heavy-Duty Single Cartridge Powder-Actuated Tool – 6059

Hilti DX 600N Heavy-Duty Single Cartridge Powder-Actuated Tool – 6059 - 27 caliber long, single cartridge piston bore 10 mm approvals meets ansi standard a 10. 3 and osha requirements for low velocity tools hilti pn 6059 package includes tool, cleaning kit, ramrod, ramrod chain, hilti spray lubricant, stop spall stabilizer 6n/s4, guide 6n/f2, piston 6n/ds, safety glasses, selector chart and operating instructions in an impact resistant plastic tool box. Fastener range all ewh10/w10 3/8″ threaded studs ds fasteners 3/4 in, 2-1/2 in power source hilti.

 

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case

Hilti 00377607 DX351-BT Fully Automatic Powder-Actuated Tool with Impact Resistant Case - Power source hilti 27 caliber short cartridges in strips of 10. Meets ansi standard a 103 and osha requirements for low velocity tools. Fasteners x-bt w6-24-6 sn 12-r (1/4-inch) x-bt w10-24-6 sn12-r (3/8-inch) stainless steel threaded studs. 12 mm piston bore.

 

Hilti DX 351 Fully Automatic Powder-Actuated Tool with X-MX 32 Magazine - 374308

Hilti DX 351 Fully Automatic Powder-Actuated Tool with X-MX 32 Magazine – 374308

Hilti DX 351 Fully Automatic Powder-Actuated Tool with X-MX 32 Magazine – 374308 - 27 caliber short in plastic strips of 10 piston bore 8 mm approvals meets ansi standard a 10. Fastener range 1/2 in, 1-1/4 in power source hilti. 3 and osha requirements for low velocity tools hilti pn 374308 package includes tool with magazine, safety glasses, cleaning kit, hilti spray lubricant and operating instructions in an impact-resistant plastic tool box.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.