Magnate 3911 Plunge Roundover Router Bit – 3/16″ Radius; 1/4″ Small Diameter; 1/4″ Shank Diameter
- This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Combination cutters for plunging through boards and for rounding corners as well as edge forming. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
EnPoint$reg; Woodwroking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 5/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit
- Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table.
Bosch 85295MC CT 5/16-Inch Diameter Roundover Router Bit with Ball Bearing 2F 1/4 Shank
- Features 5/16″ diameter bosch has been in the headlines of state of the art development for over 100 years. From the invention of the jigsaw to their ergonomic designed tools, bosch as cared about the customer since they started business in 1886. 5/16″ diameter roundover bit bosch parts keep your tools working their best for any application you can come up with, and bosch bits are the most versatile parts of them all. Be it screwing, hammering, or drilling, bosch has a bit for you.
Bosch 85296M 1-1/4-Inch Diameter 23/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
Bosch 85434MC 2-Inch Diameter 1-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank With Ball Bearing
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
Bosch 85616M 5/32-Inch Diameter 1/4-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Bosch 85289M 1/16-Inch Diameter 19/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
Magnate 7514 Point Cutting Roundover Router Bits – 7/16″ Radius; 1/2″ Shank Diameter
- The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart.
Bosch 85595M 1-1/2-Inch Diameter 53/64-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank
- Recommended for use with a routing table. The item is bosch 85595m 1-1/2-inch diameter 53/64-inch cut carbide tipped roundover router bit 1/2-inch shank. The product is manufactured in israel. Used for power tool accessories, drill bits & accessories. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
1/4″ Shank 5/16″ Radius Two Flutes Roundover Router Bit Bearing Cutter
- Bearing diameter 127mmradius 796mm / 5/16″cutting thickness 13mm / 1/2″. Weight 27gpackage content 1 x corner rounding bit1 x hard plastic case. Cutting diameter 289mm / 1 1/8″cutting depth 796mm / 5/16″total length 55mm / 217″. Product name corner rounding bitstandard 1/4″ x 5/8″shank diameter 63mm / 1/4″. Material metalcolor silver gray, green.
BOSCH 85434M 2-Inch Diameter 3/4-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank With Ball Bearing
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
EnPoint Woodwroking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 3/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit
- Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table.
1/2″ Shank 1 1/2″ Radius Two Flutes Metal Roundover Router Bit Bearing
- Weight 317gpackage content 1 x corner rounding bit1 x soft plastic case. Bearing diameter 127mmradius 381mm / 1 1/2″cutting thickness 45mm / 1 3/4″. Material metalcolor silver gray, green. Cutting diameter 892mm / 3 1/2″cutting depth 381mm / 1 1/2″total length 90mm / 35″. Product name corner rounding bitstandard 1/2″ x 3″shank diameter 127mm / 1/2″.
PORTER-CABLE 43091PC Roundover Router Bit
- Dimensions -overall product weight0. 83. 593-43091pc features -number of bits1 -size1/2″ -use materialwood -userouter bits.
EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 5/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit
- Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing.
Bosch 85290MC 3/4-Inch Diameter 11/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
- There is a compact ball-bearing pilot that guides router bit along the edge of material. It has a control cut design that helps minimize kickback. The radius cutting edge is 1/8-inch and the length of cutting edge is 3/8-inch. It requires little or no sanding before applying finish. This router bit has micrograin carbide tip for superior wear resistance and longer life. The 85290m bosch router bit creates smooth radius edges on boards and panels.
Craftsman 5/16 in. Roundover Router Bit, 1/4 in. Shank 64231
- Roundover router bit, 1/4 in. Shank, uniform grain carbide provides outstanding durability. High grade heat treated alloy steel bodies. Bits are face form and relief ground for smooth operation. 5/16 in.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
