Top 17 for Best Wet Tile

 

Lackmond Beast 7 Rear Water Tray fits Beast 7 Wet Tile Saw BEAST7RWT

Lackmond Beast 7″ Rear Water Tray fits Beast 7″ Wet Tile Saw BEAST7RWT

Lackmond Beast 7″ Rear Water Tray fits Beast 7″ Wet Tile Saw BEAST7RWT - Optional side table extensions and side water trays are available upon request. The plunge cut feature makes it easy to execute v-cap cuts, cut-outs for wall sockets and much more.  Equipped with a powerful 13 amp motor, our 7″ tile saw is comparable to most 10″ tile saws on the market. Our new beast 7″ wet tile saw is capable of performing a diagonal cut on a 18″ x 18″ tile and can execute a 24″ rip cut. The durable steel pipe saw frame is constructed to withstand the toughest conditions. 5⁰ and 45⁰ bevel cuts. Our direct drive motor rotates to ensure accurate 22. The beast-7 comes with an innovative snake pipe water nozzle which allows for precise water control and placement while minimizing overspray.

 

DeWALT D24000  D24000S Wet Tile Saw 4 Pack Replacement Brush  5140024-30-4pk

DeWALT D24000 / D24000S Wet Tile Saw (4 Pack) Replacement Brush # 5140024-30-4pk

DeWALT D24000 / D24000S Wet Tile Saw (4 Pack) Replacement Brush # 5140024-30-4pk - Includes (4), brush # 5140024-30 works with dewalt wet tile saw. Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw.

 

QEP 8 in Diamond Blade for Wet Tile Saws

QEP 8 in. Diamond Blade for Wet Tile Saws

QEP 8 in. Diamond Blade for Wet Tile Saws - Designed for wet cutting and long lasting performance. 7640 maximum rpm, arbor size of 0. The qep 6-8001q 8 in. Continuous rim diamond blade provides accurate cutting with minimal chipping. 875 to. 56 in. The blade is specifically engineered for cutting ceramic tile.

 

DeWALT D24000  D24000S Wet Tile Saw Replacement Brush  5140024-30

DeWALT D24000 / D24000S Wet Tile Saw Replacement Brush # 5140024-30

DeWALT D24000 / D24000S Wet Tile Saw Replacement Brush # 5140024-30 - Includes (1), brush # 5140024-30 works with dewalt wet tile saw. Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw.

 

RUBI TOOLS DC250-850 Wet Tile S

RUBI TOOLS DC250-850 Wet Tile S

RUBI TOOLS DC250-850 Wet Tile S - Wet tile saw. New. Ryobi 4″ tile saw.

 

Bosch TC10-07 10-Inch Wet Tile and Stone Saw with Folding Stand

Bosch TC10-07 10-Inch Wet Tile and Stone Saw with Folding Stand

Bosch TC10-07 10-Inch Wet Tile and Stone Saw with Folding Stand - Large table work surface better work piece balance and control especially large dimension tile (up to 24-inch). 14 hp, 4200 rpm motor, for cutting porcelain and stone. Expanded rear and side water collection & run-off trays prevents overspray, optimizes water retention. Durable cast aluminum base & frame designed to withstand jobsite abuse. Large rubberized sliding table surface sealed ball bearing casters better balance and control for larger tile.

 

QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade 7mm Rim Height 58-Inch Arbor Wet Cutting 8730 Max RPM

QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade, 7mm Rim Height, 5/8-Inch Arbor, Wet Cutting, 8730 Max RPM

QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade, 7mm Rim Height, 5/8-Inch Arbor, Wet Cutting, 8730 Max RPM - 25″, 2″ h x 0. 6-7006glq features -glass tile diamond blade for wet tile saws. Generic dimensions -blade width 0. -Diamond-coated cutting edge. -0. Product type -circular. -Max rpm 8730. 25″, 2″ w x 7″ d. -7mm continuous rim for clean cuts in glass tile with minimal chipping. Dimensions overall product weight -2 pounds. 06″.

 

Ridgid R4020 7 Ridgid Job Site Wet Tile Saw Rip Fence 2 Pack  080009022083-2pk

Ridgid R4020 7″ Ridgid Job Site Wet Tile Saw Rip Fence (2 Pack) # 080009022083-2pk

Ridgid R4020 7″ Ridgid Job Site Wet Tile Saw Rip Fence (2 Pack) # 080009022083-2pk - Folds for easy transport. Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting. Only 69 pounds, allowing one person to transport it and set it up. Robust all-metal construction provides durability. Huge cutting capacity, 26″ rip and 18 3/8″ diagonally. Continuous rim design provides chip free cutting in all types of tile. Adjusts to four height positions for user customization. Extended performance diamond matrix provides long life and enhanced material cutting. Able has rubber top to prevent sliding and slipping.

 

Lackmond Universal Side Water Tray for 7-inch and 10-inch Beast Wet Tile Saws

Lackmond Universal Side Water Tray for 7-inch and 10-inch Beast Wet Tile Saws

Lackmond Universal Side Water Tray for 7-inch and 10-inch Beast Wet Tile Saws - Optional side water splash tray (for catching drip / run off on larger format tiles) and optional gravity folding stand. The water tray slides along with the saw and diverts water back in to the system, preventing annoying water puddles and diverting water back in to the water tray.

 

Imer Combicut 250VA Tile Wet Tile Saw

Imer Combicut 250VA Tile Wet Tile Saw

Imer Combicut 250VA Tile Wet Tile Saw - The new 1. This improves accuracy, a feature this saw was known for already this allows very accurate chip free cutting, as grout joints and slab look installation sare more and more common. Sealed bushings ensure plunge cuts are smooth and precise. The 72 lb. Combi 250va is imer’s bread and butter 10″ tile saw. 75 hp, high torque motor means this saw cuts even faster than it’s predecessor. For additional accuracy, the 250va includes a laser guide. 75 hp class-leading motor. Comes with blade, stand and accessory side table. For these larger tiles, the included extension table makes cutting easier and more convenient. The feet on the stand are rubber so the stand won’t slip on or scratch the floor. This saw sets the standard for overhead rail saws for cutting tile and stone on the jobsite. It includes the new imer 1. Aircraft quality cast aluminum materials make for a rigid and light weight saw which will maintain its finish for years to come. This makes the saw extremely easy to clean just spray with wd-40 and wipe clean.

 

Ridgid R4030 7 Wet Tile Saw

Ridgid R4030 7″ Wet Tile Saw

Ridgid R4030 7″ Wet Tile Saw - Best in class cut capacity 24 in rip, 18 in diagonal and 2 1/4 in deep. Deep well wave wall with submersible pump extends pump life. Laser alignment system assists operator in accurately align cutting wheel with the cut line. Powerful motor heavy duty motor powers through natural and manmade tile and pavers. Guard baffle reduces air turbulence to help keep water on the blade while removing excess.

 

DeWALT D24000  D24000S Wet Tile Saw 10 Pack Replacement Brush  5140024-30-10pk

DeWALT D24000 / D24000S Wet Tile Saw (10 Pack) Replacement Brush # 5140024-30-10pk

DeWALT D24000 / D24000S Wet Tile Saw (10 Pack) Replacement Brush # 5140024-30-10pk - Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw. Includes (10), brush # 5140024-30 works with dewalt wet tile saw.

 

IVY Classic 38162 Diamond Plus 4-12-Inch Dry and Wet Tile Cutting Continuous Rim Diamond Blade with 78 - 58-Inch Arbor 1Card

IVY Classic 38162 Diamond Plus 4-1/2-Inch Dry and Wet Tile Cutting Continuous Rim Diamond Blade with 7/8 – 5/8-Inch Arbor, 1/Card

IVY Classic 38162 Diamond Plus 4-1/2-Inch Dry and Wet Tile Cutting Continuous Rim Diamond Blade with 7/8 – 5/8-Inch Arbor, 1/Card - Designed for precise, smooth cutting of ceramic, marble, slate and granite tile. Arbor 7/8-inch, 5/8-inch, rim width 19mm, rim height 55mm, max rpm 13,300. State of the art automated manufacturing technology. Diamond plus blades, a highly reliable blade at a lower price for small to medium cutting jobs. Dry and wet cutting turbo continuous rim.

 

DeWalt D24000 Wet Tile Saw with Slide Table 110 Volt

DeWalt D24000 Wet Tile Saw with Slide Table 110 Volt

DeWalt D24000 Wet Tile Saw with Slide Table 110 Volt - Integrated 45/225° miter feature for quick angled cuts. Compact tile saw frame allows for easy transport and storage in vehicle, 34″ x 26″. Only 69 lbs, allows one person to transport and set up tile saw. Removeable cutting cart for easy cleaning of tile saw. Cantilevering rail/cart system allows for 24″ ripping capacity, 18″ tile on diagonal.

 

RUBI TOOLS DC250-1200 Wet Tile

RUBI TOOLS DC250-1200 Wet Tile

RUBI TOOLS DC250-1200 Wet Tile - Rubi tools dc250-1200 wet tile. 7-inch bench wet tile saw. 15 pounds 1-year warranty. High-impact thermoplastic water reservoir will not rust or peel. Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide.

 

MK Diamond TX-4 1-34 HP 10 Wet Tile Saw

MK Diamond TX-4 1-3/4 HP, 10″ Wet Tile Saw

MK Diamond TX-4 1-3/4 HP, 10″ Wet Tile Saw - The water distribution system provides a controllable, even flow to both sides of the blade. (39kg) lxwxh 44″ x 25″ x 20″ lxwxh (mm) 1118 x 635 x 508 shipping method ups / fed-ex accessories included 10″ wet cutting diamond blade submersible water pump rip guide with protractor side & rear water trays side table. The tx-4tm features an innovative maintenance free guide bar system that eliminates the need for regular lubrication. Tx-4 features large, aluminum cutting table with non-slip rubber surface built-in fully adjustable miter system for precise 22. One-year limited warranty. 5 and 45 degree miter cuts. The tilting head allows 22. 5º and 45º angle cuts water distribution system provides a controllable, even flow to both sides of the blade variable height cutting head allows for plunge cutting maintenance free guide bar system eliminates the need for regular lubrication hinged blade guard for easy blade changes and maintenance inspection detachable side water containment tray slides with the table detachable rear tray for water containment air flow module protects the motor from spray during operation the side extension table allows greater support of larger materials during cutting table lock makes for easy transportation 10″ wet cutting continuous rim blade included one-year limited warranty tx-4 171231 voltage 120v horse power 1-3/4 hp motor rpm 3,500 blade capacity 10″ (254mm) arbor size 1″ (25mm) depth of cut 3-1/2″ (89mm) depth of cut at 45° 2-3/8″ (60mm) length of cut 24″ (610mm) diagonally cuts 18″ tile (457mm) weight 85 lbs.

 

Imer Combi 200VA 8 Wet Tile Saw 1188084

Imer Combi 200VA 8″ Wet Tile Saw 1188084

Imer Combi 200VA 8″ Wet Tile Saw 1188084 - Combi 200va is a powerful, durable, accurate and flexible tile saw that is easily portable by one person, yet flexbile enough to handle a wide variety of tile installation jobs. The 48 lb. This saw includes a stand and blade, and is ready to perform right out of the box. A great saw for both professionals and do-it-yourselfers alike. Whats in the box imer combi 200va saw, imer tile saw stand, saw table extension, 8″ diamond blade, drip tray water pump, rip guide, protractor guide, wrenches and manual.