Top 18 Best Heavy Duty Clamps

 

Foto&Tech Heavy Duty Muslin Clamps 10-pack Set of 4.5 inch for Photography Photo Studio Backdrops/backgrounds/Photo Paper/ Light Reflector (10 Pack) - Solid steel pivot and tempered spring for years of use. Designed one hole on each handle, connect to studio support system stand easily. Thick-walled reinforced nylon construction, built to last. 45 cm mouth opening maximum. Adjustable mouth pad fit universal size.

 

Bessey Tradesman Heavy Duty Clamp, 16″ Capacity - This tradesman professional series bar clamp has a 16″ clamping capacity, 1″ x 5/16″ rail size, 4″ throat depth, and nominal clamping pressure of 880 lbs. Finally the pressure plates can be easily changed without tools. Then the high quality rail from bessey’s own german factories. Top jaws are fitted to the rail with no mechanical fasteners to loosen up over time while the powder coating protects against corrosion. Smooth running spindle with acme thread provides more clamping with less effort. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. The integrated bessey anti-slip system with a set screw that is molded into the sliding arm that interlocks with the serration on the rail to prevent the clamp from slipping. The corrugated malleable cast iron fixed jaw and sliding arm generatepowerful, rigid clamping force.

 

Heavy Duty Nylon Cable Clamp, 0.25″ Diameter, 0.5″ Width, Black - Designed to hold cables, tubes, etc. Nsi heavy duty clamps are made from nylon 66. 94v-2 rated. These clamps have fully radiused interior edges to protect cable insulation. Non-conductive, noncorrosive, resistant to fuels, lubricants and most chemicals. 180-inches mounting hole. Complete with 0.

 

HHIP 7030-0010 4 Piece Heavy Duty C-Clamp Set - Industrial grade. Hhip 4 piece heavy duty c-clamp set is very strong frame with hardened threads. .

 

IRWINQUICK-GRIPCorner Clamp Pad for Medium-Duty and Heavy-Duty Clamps, 1964752 - The irwinquick-gripone-handed bar clamp accessories extend the traditional one-handed bar clamp’s functionalities providing added versatility to accomplish more tasks with each clamp. Irwin(r) quick-grip(r) corner clamp pad makes clamping drawers, frames, and other workpieces at 90° easier and more efficient. Do more with quick-grip accessories. Durably constructed, it is easy-to-use with irwin(r) quick-grip(r) medium-duty and heavy-duty one-handed bar clamps.

 

FL12 Solar Floodlight ‘Heavy Duty Clamp Attachment’ Kit - The clamp is designed to attach to a pole with the diameter of up to 3. Installation is easy slide banding around the pole, and through the bracket, and tighten the banding for a secure fit. Color of clamp is grey. This heavy duty mount is suitable for attaching our fl05, fl06,144 led, 288 led and 504 led floodlights to poles and other vertical surfaces. The clamp can be directly screwed or bolted to poles with larger diameters. . The bracket attaches to the pole using two supplied adjustable banding. For installation to other vertical or horizontal surfaces simply discard the banding and screw or bolt the flat side of the mounting plate to your surface (hardware not included). 5″.

 

12pcs 6″ Large Heavy Duty Plastic Spring Clamps Tips 3″ Jaw Opening - 6″ large heavy duty spring clamps 3 inch jaw opening.

 

JFULLERTON 4.5 Inch. Spring Clamp Set Of 4 Pieces Muslin Clamps with Red Clamp End for Photo Studio Backdrops Backgrounds Woodworking Heavy Duty Clamp - Deal for clipping backdrop/green screen to stand essential item in any studio setup heavy duty muslin clamp with firm grip innovative movable teeth for ultimate flexibility and tension. These clamps for sale can be used for gluing, clamping, gripping, and in diy lighting photography. Perfect for projects around the house or at work,ours spring clamps can take on any job. Large hand clamps are very strong, can easily fit most photography stands, home diy, or craft jobs. Heavy duty muslin clamps have a 2+ inch mouth opening, the perfect clamps for woodworking, diy etc.

 

FL13 Solar Panel ‘Heavy Duty Clamp Attachment’ Kit - Once secured, this bracket will enable a 6w, 7w, 10w, 14w, or 20w solar panel to attach to it. For installation to a vertical or horizontal surface, discard the banding, and screw or bolt the flat side of the mounting plate to the surface (hardware not included). 5″ diameter. The kit is supplied with two pieces of adjustable banding which attaches the bracket to the pole. Installation is simple wrap the banding around the pole and through the bracket, and tighten the banding. It can also be used to fix to almost any flat surface (horizontal or vertical). Color of bracket is grey. The solar panel attachment piece is adjustable and allows for various solar panel widths. This kit consists of a heavy duty steel mount which is suitable for attaching solar panels to a round pole or post. It has been designed to mount to round poles of up to 3. This clamp may be surface mounted directly to a pole if pole diameter is too large.

 

Clamp-Rite 13300CR Push-Pull Toggle Clamp, Flanged Based, Imperial Thread, Heavy Duty, 2500 lb Holding Capacity - Most models can be locked in either the extended or the retracted position, allowing them to be used in a pushing or pulling manner. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. If used in a pulling application, provision must be made to allow adequate clearance for the handle to fully rotate through it’s full range of motion. Model 13300cr is a robust clamp suited for a wide range of applications including checking fixtures and assembly jigs where higher holding forces are required. Our products are manufactured to exacting specifications with quality materials and workmanship. Clamp-rite push-pull toggle clamps apply clamping force in a straight line.

 

American DJ C-Clamp | Heavy Duty Clamp - This adj c-clamp is an essential part of your lighting rig. Designed to hold most standard fixtures, this c-clamp attaches to any truss or pipe up to 2″ in diameter.

 

GCA 6″ inch Clamp Large Heavy Duty Spring Metal – 3 inch Jaw opening – 4pack - The clamps feature a heavy-duty tempered steel spring. Heavy duty. Each clamp is 6″ long with a 2″ throat depth and a 3″ opening. 4 pack. Non-slip padded jaws grip work piece without damaging surface.

 

Generic Large Plastic 6 Inch Heavy Duty Spring Clamps Muslin Clamps Pack 5 - Each clamp measures 6″ long and 4″ wide. Great elasticity,not easy to broke. Perfect for gluing, clamping, gripping, diy lighting photography. These clamps are very strong,and will fits most stands. Beautiful appearance,good hand feeling.

 

JFullerton 6 Pack – 4.5 Inch Spring Clamps Large Heavy Duty Plastic Muslin Clamps with Red Clamp End for Photo Studio Backdrops Backgrounds Woodworking Heavy Duty Clamp - Perfect for projects around the house or at work,ours spring clamps can take on any job. These clamps for sale can be used for gluing, clamping, gripping, and in diy lighting photography. Large hand clamps are very strong, can easily fit most photography stands, home diy, or craft jobs. Heavy duty muslin clamps have a 2+ inch mouth opening, the perfect clamps for woodworking, diy etc. Deal for clipping backdrop/green screen to stand essential item in any studio setup heavy duty muslin clamp with firm grip innovative movable teeth for ultimate flexibility and tension.

 

Southwire CLPT04 4-Inch Adjustable Heavy Duty Clamp Tie w/ Rotating Handle, Reusable Zip Down Cable, Brown - Southwire heavy duty clamp ties are great to organize, carry and store your cords, ropes, hoses, cables, wire, chains. . With the large hang notch design, heavy duty carrying handle, 360 rotating handle, easy release trigger and flex tie design the uses are endless.

 

GCA 6″ inch Clamp Large Heavy Duty Spring Metal – 3 inch Jaw opening – 2pack - Each clamp is 6″ long with a 2″ throat depth and a 3″ opening. Heavy duty. 2 pack. The clamps feature a heavy-duty tempered steel spring. Non-slip padded jaws grip work piece without damaging surface.

 

JFULLERTON Spring Clamp Set 8 Piece 4 set of Large 6 Inch Heavy Duty Clamps + 4 set of 4 Inch Small Muslin Clamps Clips Kit with Red Clamp End for Photo Studio Backdrops Backgrounds Woodworking - 4 set of 4 inch and 4 set of 6 inch clamps. Great for handy man or photo grapher and photo studio for back drop clips. Non slip tread pattern make the handle of the comfort and non slip. Adjustable, the red clamp ends flip up and down. Very strong to fix plastic sheeting and fabric fit for most stands and photo studio backdrops woodworking great hand tool light weight and strong clamping force high strength fiberglass-reinforced nylon construction make this clip easy to work, tough enough to finish the work.

 

Dixon 13MHHM200SN Stainless Steel 304 Single Pin Heavy Duty Clamp with Serrated Wing Nut, 2″ Tube OD - Pack of 1. Made of stainless steel 304. Single pin heavy duty clamp with serrated wing nut. 250 psi at 250 degree f and 450 psi at 70 degree f (wing nut tightened to 25″ lbs torque). 2″ tube od.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.