Top 19 Drill Americas for 2020

 

Drill America 38-18 NPS High Speed Steel 4 Flute Straight Pipe Tap DWT Series

Drill America 3/8″-18 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series

Drill America 3/8″-18 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Round shank with square end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Drill America 29 Piece M35 Cobalt Drill Bit Set in Round Case 116 - 12 X 64ths DWDCO Series

Drill America 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16″ – 1/2″ X 64ths), DWDCO Series

Drill America 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16″ – 1/2″ X 64ths), DWDCO Series - Gold oxide finish lubricates the drill bit and provides wear resistance. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Set of 29 jobber length drill bits includes inch sizes 1/16″ to 1/2″ in 1/64″ increments. Meets ansi specifications. Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging.

 

Drill America 18 x 18 High Speed Steel Extra Long Drill Bit DWDDL Series

Drill America 1/8″ x 18″ High Speed Steel Extra Long Drill Bit, DWDDL Series

Drill America 1/8″ x 18″ High Speed Steel Extra Long Drill Bit, DWDDL Series - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America 764 x 6 Cobalt Aircraft Extension Drill Bit GLBCO Series

Drill America 7/64″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series

Drill America 7/64″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series - Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium. 135° split point tip prevents drill from walking. Round shanks allow use with a wide variety of tool holding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 6″ overall length for drilling where extra length for reach is required.

 

Drill America 60 Piece High Speed Steel Screw Machine Stub Drill Bit Set Wire Sizes 1 - 60 DWDST Series

Drill America 60 Piece High Speed Steel Screw Machine (Stub) Drill Bit Set (Wire Sizes: #1 – #60), DWDST Series

Drill America 60 Piece High Speed Steel Screw Machine (Stub) Drill Bit Set (Wire Sizes: #1 – #60), DWDST Series - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 60 piece drill bit set comes in a metal case. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

Drill America 1-12-11-12 NPT Pipe Tap Carbon Steel DWTPT Series

Drill America 1-1/2″-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series

Drill America 1-1/2″-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Drill America F Cobalt Heavy Duty Drill Bit Pack of 12 DACO Series

Drill America F Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

Drill America F Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Manufactured to national aerospace standard 907. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America 29 Piece m42 Cobalt Screw Machine Stub Drill Bit Set 116 - 12 x 64ths DASTCO Series

Drill America 29 Piece m42 Cobalt Screw Machine (Stub) Drill Bit Set (1/16″ – 1/2″ x 64ths), D/ASTCO Series

Drill America 29 Piece m42 Cobalt Screw Machine (Stub) Drill Bit Set (1/16″ – 1/2″ x 64ths), D/ASTCO Series - Round shanks allow use with a wide variety of toolholding systems cutting angle 135. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 piece drill bit set comes in a metal case. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Drill America 916 Reduced Shank Cobalt Drill Bit with 12 Shank DACO Series

Drill America 9/16″ Reduced Shank Cobalt Drill Bit with 1/2″ Shank, D/ACO Series

Drill America 9/16″ Reduced Shank Cobalt Drill Bit with 1/2″ Shank, D/ACO Series - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Manufactured to national aerospace standard 907. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America 1-38 Reduced Shank High Speed Steel Drill Bit with 12 Shank DWDRSD Series

Drill America 1-3/8″ Reduced Shank High Speed Steel Drill Bit with 1/2″ Shank, DWDRSD Series

Drill America 1-3/8″ Reduced Shank High Speed Steel Drill Bit with 1/2″ Shank, DWDRSD Series - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Ideal for drilling in low and medium tensile strength materials.

 

Drill America 2400mm High Speed Steel 4 Flute Single End End Mill DWC Series

Drill America 24.00mm High Speed Steel 4 Flute Single End End Mill, DWC Series

Drill America 24.00mm High Speed Steel 4 Flute Single End End Mill, DWC Series - Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in polished finish. Designed to machine most materials of medium hardness such as steel, brass, bronze and iron. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill America 4-40 High Speed Steel 2 Flute Spiral Point Tap DWT Series

Drill America 4-40 High Speed Steel 2 Flute Spiral Point Tap, DWT Series

Drill America 4-40 High Speed Steel 2 Flute Spiral Point Tap, DWT Series - Used to make new threads or re-thread damaged and/or jammed threads. High speed steel hand taps come in three styles taper style starts the thread square with the workpiece plug style generally used in thru holes bottom style generate the thread to the bottom of the hole. Hand taps are popular for use in general machine tapping or cnc tapping. High speed steel hand taps are the most versatile taps for hand use, or for tapping under power. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Drill America 5 Piece NPT Pipe Tap Set 18 14 38 12 and 34 Plastic Pouch Case POU Series

Drill America 5 Piece NPT Pipe Tap Set (1/8″, 1/4″, 3/8″, 1/2″ and 3/4″), Plastic Pouch Case, POU Series

Drill America 5 Piece NPT Pipe Tap Set (1/8″, 1/4″, 3/8″, 1/2″ and 3/4″), Plastic Pouch Case, POU Series - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Npt pipe taps, sizes 1/4″-18 npt, 3/8″-18 npt, 1/2″-14 npt, 3/4″-14 npt carbon steel pipe taps in plastic pouch case.

 

Drill America DWTPT14-1-14SET 6 Piece NPT Pipe Tap Set in Wooden Case 14 38 12 34 1 and 1-14 Carbon Steel DWT Series Uncoated Bright Small

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4″, 3/8″, 1/2″, 3/4″, 1″ and 1-1/4″), Carbon Steel, DWT Series, Uncoated (Bright), Small

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4″, 3/8″, 1/2″, 3/4″, 1″ and 1-1/4″), Carbon Steel, DWT Series, Uncoated (Bright), Small - The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot all pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. 6 piece set of carbon steel npt pipe taps, sizes /4″, 3/8″, 1/2″, 3/4″, 1″ and 1-1/4″. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Also called ‘pipe taps’, national pipe taper (npt) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.

 

Drill America 732 x 12 High Speed Steel Aircraft Extension Drill Bit DWDAC Series

Drill America 7/32″ x 12″ High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

Drill America 7/32″ x 12″ High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Manufactured to national aerospace standard 907. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of tool holding systems.

 

Drill America 532 x 6 Cobalt Aircraft Extension Drill Bit GLBCO Series

Drill America 5/32″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series

Drill America 5/32″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series - 135° split point tip prevents drill from walking. Round shanks allow use with a wide variety of tool holding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 6″ overall length for drilling where extra length for reach is required. Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.

 

Drill America 2 Solid Carbide Combined Drill Bit and Countersink DMO Series

Drill America 2 Solid Carbide Combined Drill Bit and Countersink, DMO Series

Drill America 2 Solid Carbide Combined Drill Bit and Countersink, DMO Series - Round shanks allow use with a wide variety of toolholding systems. Used for producing center holes in work pieces which require machining between centers. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Drill America HUT29 64ths Drill Bit Index 10550 116-12

Drill America HUT29 64ths Drill Bit Index, 10550, 1/16-1/2

Drill America HUT29 64ths Drill Bit Index, 10550, 1/16-1/2 - 1/16-1/2x64ths drill bit indexed p #10550.

 

Drill America 316 x 6 Cobalt Aircraft Extension Drill Bit GLBCO Series

Drill America 3/16″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series

Drill America 3/16″ x 6″ Cobalt Aircraft Extension Drill Bit, GLBCO Series - Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 6″ overall length for drilling where extra length for reach is required. 135° split point tip prevents drill from walking. Round shanks allow use with a wide variety of tool holding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.