Top 20 Best Spindle Sanders

 

Grizzly G1071 Oscillating Spindle Sander - 2 -71. 2-08 and ul 987-7th standards. Csa certified meeting csa c22. We back this up with our warranty parts and service. Features • motor heavy-duty 1 hp 120v/240v single-phase 12a/6a prewired 120v • 25″ x 25″ cast iron table tilts to 45-degree left 15-degree right • ten spindle sizes 1/4″ x 5″ 3/8″ x 6″ 1/2″ x 6″ 5/8″ x 6″ 3/4″ x 9″ 1″ x 9″ 1-1/2″ x 9″ 2″ x 9″ 3″ x 9″ 4″ x 9″ tapered and threaded • floor to table height 35-1/2″ • 1725 rpm spindle speed • includes formed and welded steel stand • spindle oscillates at 72 strokes-per-minute • stroke length 1-1/2″ • built-in 4″ dust collection port • lubricated-for-life ball bearings • features ground steel table inserts and 100 grit sleeve for each spindle • powder coated paint • csa certified • approximate shipping weight 296-pound. This sander’s big 25″ x 25″ table makes cabinet doors and other large projects a breeze to edge sand, and the wide variety of interchangeable spindles turn custom work into “child’s” play. Our spindle sander will satisfy the needs of both the professional and serious hobbyist.

 

POWERTEC OS1000 18″ Oscillating Spindle Sander - On-board storage and safety power switch lock. Drum diameter 1/2-inch, 3/4-inch, 1-inch, 1-1/2-inch, 2-inch, 3-inch. Oscillating action reduces friction heat to protect wood and prolong sleeve life. Sand contours, arcs, curves and other irregular shapes faster and easier. 18-inch diameter cast iron table.

 

DELTA 31-797 1-Inch 120 Grit Sanding Sleeves for 31-780 Spindle Sander (6-Pack) - Aluminum oxide abrasive provides long lasting, efficient sanding. 1 inch diameter for sanding smaller contours and curves. 120 grit for aggressive sanding action.

 

WEN 6510 Oscillating Spindle Sander - Powerful 1/2 hp 35 amp motor provides 58 opm and 2000 rpm. Attach the dust collector of your choice to the onboard dust port to minimize clean-up. Backed by a two-year warranty. Includes 6 sanding sleeve sizes for a variety of curvatures 1/2 in, 3/4, in, 1 in, 1-1/2 in, 2 in, 3 in. Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor.

 

DELTA 31-783 1-Inch Sanding Spindle Kit for 31-780 B.O.S.S. Spindle Sander - Aluminum oxide abrasive provides long lasting, efficient sanding. 1 inch diameter for sanding smaller contours and curves. 120 grit for aggressive sanding action.

 

DELTA 31-808 2-Inch 80 Grit Sanding Sleeves for 31-780 Spindle Sander (6-Pack) - 2 inch diameter for sanding smaller contours and curves. 80 grit for aggressive sanding action. Aluminum oxide abrasive provides long lasting, efficient sanding.

 

Ridgid ZREB4424 3/8 HP Oscillating Edge Belt/Spindle Sander (Certified Refurbished) - Table tilts up to 48 degrees with detents at popular angles 0, 15, 22, 30, and 45 degrees. Includes a 4 in x 24 in belt, all drums, and a set of sleeves. Up to 1725 rpm spindle speed and 60 opm of sanding action. New original ridgid eb4424 oscillating edge/belt spindle sander. Powerful 5 amp â…œ hp motor for high-performance precision results.

 

WoodRiver Benchtop Spindle Sander - This compact woodriver® spindle sander can be used to sand various contours, arcs, curves and other irregular shapes. Adjustable height control screws have been added to insure the table inserts can be used flush with the table surface. The built-in storage system keeps sanding drums and throat plates organized and easy to access. This sander also features a 1-1/2″ exhaust port for dust collection. Includes six each of sanding sleeves and table inserts five each of rubber sanding drums and drum washers.

 

Ridgid EB44240 / EB44241 Oscillating Edge Belt/Spindle Sander Replacement 2″ Throat Plate # 825808 - Includes (1), 2″ throat plate # 825808 works with ridgid tools. Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models ridgid eb44240 oscillating edge belt sander, eb44241 oscillating edge belt/spindle sander.

 

3/4″ B.O.S.S. Oscillating Spindle Sander Replacement Drum & Sleeve Kit - Fits delta sa350k boss bench oscillating spindle sander. High performance abrasive sleeve for professional sanding results.

 

Rockwell RK9011 Shop Series Oscillating Spindle Sander - 5 amps 21 accessories die-cast iron table powerful 3. On board storage keeps sanding drums and throat plates from getting lost. Tool features an exhaust port for vacuum cleaner connection, keyed safety switch and rubber foot pads. 5 amp motor 58 oscillations per minute. Specs 120v/60hz, 2000 rpm no-load speed, 5/8″ spindle stroke, table size is 14-1/2″x 11-3/8″, 58 oscillations per minute, 3-5/8″ max sanding height, weight 34 lbs. Includes 6 sanding sleeves 6 table inserts and 5 rubber sanding drums 5 drum washers. 3. Shop series oscillating spindle sander kit sander is excellent for sanding contours, arcs, curves and other irregular shapes.

 

Grizzly G9922 Oscillating Spindle Sander - Features • motor 1/2 hip 110v single-phase 4. A 14-1/2-inch square table with miter gauge provides a solid base on which to locate your work piece. All the key features of the large professional machines in a low cost stand-mounted unit. 6a tic • 3450 rpm spindle speed • ground cast iron 14-1/2-inch x 14-1/2-inch table tilts to 45° • spindle oscillates at 64 spam • stroke length 1-inch • built in 2-inch dust collection port • shielded & permanently lubricated ball bearings • floor to table height of 39-1/2-inch • includes stamped and welded steel stand • includes 80 grit sleeve for spindle miter gauge and wrench set • approximate shipping weight 102 lbs. The 1/2 hip motor drives the 2-inch diameter spindle with a full 1-inch stroke. The table can be tilted to 45° for bevel sanding. Sanding contoured edges & irregular shapes will be easy with this spindle sander.

 

Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander - Table size 11-1/2-inch w x 15-inch l x 1-5/16 h. 1/2 horsepower permanent magnet motor, 120-volt, single phase, csa certified. Sanding drum diameter 3/4″, 1″, 1-1/2″, 2″ and 3″ sanding drum length 4-1/2-inch. Sanding sleeves 1/2″, 3/4″, 1″, 1-1/2″, 2″ and 3″ (1/2″ sleeve fits directly on the spindle). Weighs 30-pound.

 

Rockwell RW9185 No.150 Spindle Sander Sleeves for RK9011, 6-Pack - The 6-pack comes with one each of the following 1/2-inch, 3/4-inch, 1-inch, 1-1/2-inch, 2-inch, 3-inch in #150 grit sleeves. . Rockwell 6-pack spindle sander sleeves are made for the rk9011 shop series spindle sander.

 

Triton TSPS450 Oscillating Spindle Sander - Powerful 35a (450w) motorno load speed, 2000 rpmoscillation speed, 58 opm. Rotating & oscillating action for increased speed, efficiency and a precision finish. On-board storage for all accessories. Includes 6 sanding sleeves with matching rubber drums & table inserts. Ideal for sanding contours, arcs, curves & other irregular shapes.

 

Rockwell RW9183 No.50 Spindle Sander Sleeves for RK9011, 6-Pack - Rockwell 6-pack spindle sander sleeves are made for the rk9011 shop series spindle sander. The 6-pack comes with one each of the following 1/2-inch, 3/4-inch, 1-inch, 1-1/2-inch, 2-inch, 3-inch in #50 grit sleeves. .

 

Delta 31-484 1HP Tilting Spindle Floor Oscillating Spindle Sander - Heavy duty oscillating tilt spindle floor sander 1 hp 115v 1725 rpm motor 1 1/2-inch oscillation stroke 71 opm heavy duty strrl frame construction cast iron trunnion system for increased stability and accuracy uique ) to 45 degree tilt arbor design allows opertor to adjust sanding angle and to bevel sand while table remains flat 10 interchangable threaded spindles 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, 1-inch, 1 1/2-inch, 2-inch, 3-inch, and 4-inch. Dust port 4 in. Oscillation length table 24 5/8 in. Motor 1 hp, 110v, 1 phase speeds 1,725 rpm, 71 opm with 1 1/2 in. X 24 1/2 in. , Fixed, precision ground cast iron table height 38 3/8 in. Insert diameter 8 3/4 in.

 

DELTA 31-798 1-Inch 150 Grit Sanding Sleeves for 31-780 Spindle Sander (6-Pack) - For use on most materials including ferrous and non-ferrous metals and most non metallic materials. For boss bench oscillating spindle sander. High performance abrasive sleeves for professional sanding results. X” weight, polyester-coated, cloth-backed, aluminum oxide sanding sleeves.

 

Grizzly G0739 Oscillating Spindle Sander - With six sanding sleeve diameters, sanding to the line is never a problem. This oscillating spindle sander with cast iron table will handle just about any job you throw at it. Don-inch let the compact size fool you. Onboard storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and handy. This is truly a great benchtop machine.

 

DELTA 31-790 1/2-Inch 150 Grit Sanding Sleeves for 31-780 Spindle Sander (6-Pack) - Multi-layer cloth backing provides stiff tube for easy and precise mounting. Excellent for all types of materials including wood metal and plastic. Continuous spiral wrap eliminates joint. Medium open coat is excellent for softwood hardwood plastic and metal.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.