Top 21 Best Table Fences

 

Craftsman A134010801 Table Saw Miter Fence Assembly - This part is also used for a ryobi saw model bts211. 218060. Fence assembly is used on table saw. 8-inch high. Fits craftsman model 315. Craftsman a134010801 table saw miter fence assembly. 14. 6-inch wide, and 2. From hand tools to power tools and from lawn & garden equipment to tool chests and other storage solutions, craftsman products are built to last and designed to give you the confidence to complete any project no matter the size. 4-inch long, 3. Package weight of this item is 1-pound. Craftsman, america’s most trusted tool brand, is characterized by durability, innovation and consistency.

 

Rockler Clear Dust Hose for Router Table Fence Port - 4000 size 2-1/2″ length 3 ft . 5 weight (lbs) 1. Manufacturer part number r-4 clear 2.

 

Woodtek 165560, Portable Power Tool Accessories, Routers & Trimmers, Fence Ass’y For 27″ X 16″ Cast Iron Router Table - Net weight 11. Imported. 0 lbs. Shipping weight 12. Tool-free adjustment of fence faces. (Purchased separately. Fence is easily tightened with tall, above-the-fence knobs and glides smoothly in dual tracks scales on the dual tracks can be zero-referenced for repeatable set-ups. ) Includes molded dust port with 2-1/4″ id, 2-1/2″ od and 4″ adjustable bit guard. 1 lbs. The woodtek® deluxe 27″ router table fence is designed to fit the woodtek® small, 27″ x 16″ cast iron table 165-557 and will also fit most any top 1/2″ to 1-1/2″ thick and 21-1/2″ to 27″ wide. Fence dimensions 3-5/8″ tall x 30-5/8″ long. Top fence scale allows for precise placement of stops, hold downs and other fixtures. Finely machined from 6061 aluminum extrusion with top and front t-slots for anchoring accessories fence faces are constructed of pvc coated mdf and adjust tool free.

 

Drill Press Extension Table with Fence - 90-degree flipguide for vertical footing on bandsaws and router tables. Optional mounts for deflector/connector shield plate for additional protection against chip debris. Made in the usa a true microjig innovation. 90-degree flip guide for vertical footing on band saws and router tables. Auto-retracting heel technology hooks the tail-end of your board. Ergonomic handle exerts directional pressure against the fence. Proprietary green grr-rip for extreme hold.

 

Eagle America 415-4502 X1 Router Table Fence - Fence mounts to any table that is 1/2″ to 1‑1/2″ thick and from 24″ to 32″ wide. Includes two 1/32″ x 1/16″ space bars. Made of melamine coated heavy-duty mdf and fully edge banded for low friction and long life. Dust port is designed to accept a 2-1/4″ or 2-1/2″ vacuum hose.

 

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences, Model: KMS7215, Tools & Hardware store - Allows you to dial-in precise adjustments easily with one hand. Black plastic fixing knob. Manufacturer’s limited 30-day warranty. Easy-to-grip ribbed dial. Time-saving and accurate saw fence micro-adjuster.

 

KREG PRS1015 Precision Router Table Fence by Kreg - Anodised aluminiummagnified measuring system offers outstanding accuracyincludes two rods to offer a built-in jointing systemcompatible with any router tablet-square style self-squaring carriage.

 

Pro Phenolic Router Table, Fence, Stand, & FX Router Lift - Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. Fence features a 2-1/2″ o. Router lift fx includes insert ring with 1-1/2″ opening. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. D. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. 10-point plate leveling/locking system. Includes bit safety guard for safe routing. These packages include our steel stand and the acclaimed router lift fx for effortless above-table adjustments and bit changes. 24″ x 32″ table for over five square feet of surface area. 8-1/4″ x 11-3/4″ x 1/4″ aluminum plate. D. Large opening in fence for big router bits. (2-1/4″ i. ) Dust port. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate, and the whiter, brighter finish enhances visibility. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. Featuring 8-points of plate leveling and 2 locking points. Includes new, larger steel stand, which measures 18″d x 24″w x 32″h. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. 24″ x 32″ table. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. Ergonomic t-knobs for easy fence adjustment.

 

Platte River 149078, Portable Power Tool Accessories, Routers & Trimmers, Router Table Fence With Dust Port - One-year parts and workmanship warranty. Separate miter saw hardware kit does not include fence stock. Profile includes t-slots that accept 1/4-20 hex head bolts and allow them to slide lengthwise. . Woodtek-usaâ„¢ extruded aluminum fence stock is versatile and easy to install, torsion box extruded metal maintains a consistent, straight work surface. Ready-to-install fence kits save time and will increase the versatility of your tablesaw miter gauge, bandsaw or router table. Usa. T-slots add capacity to attach and adjust jigs and work stops.

 

24″ Deluxe Router Table Fence by Peachtree Woodworking PW3318 - Tall adjustment knobs allow easy access for moving your fence forward and backward. System equipped with a dust port the envelopes the opening between the 2 mdf fence sections. 2 mdf fence plates supported by solid aluminum “l” fence. Built in t-track. Accommodates router bits up to 3 1/2″ in diameter.

 

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences - Allows you to dial-in precise adjustments easily with one hand to your kreg precision router table or precision band saw down to. Band saw/router table micro-adjustertime-saving and accurate saw fence micro-adjuster. Black plastic fixing knob. Easy to grip ribbed dial. 5100748. 005″. Dimensions 7″ x 2″ x 5″.

 

Kreg PRS1010 36-inch Precision Router Table Fence - Highlights innovative self-squaring t-square style design mounts to tables between 3/4″ and 1-1/2″ thick fully enclosed aluminum extrusion and full length vacuum chamber for a cleaner shop fully independent fence faces for use as a vertical jointer.

 

FeatherBoard Milescraft 1406 for Router Tables, Table Saws and Fences - Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back.

 

Rockler Pro Phenolic Router Table, Fence, & FX Router Lift - (2-1/4″ i. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. The whiter, brighter finish enhances visibility, while the included router lift fx allows effortless above-table adjustments and bit changes. Featuring 8-points of plate leveling and 2 locking points. D. Ergonomic t-knobs for easy fence adjustment. Includes bit safety guard for safe routing. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. Router lift fx includes insert ring with 1-1/2″ opening. D. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate. 24″ x 32″ table for over five square feet of surface area. ) Dust port. Fence features a 2-1/2″ o. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. Large opening in fence for big router bits. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more.

 

Kreg PRS1015 Router Table Fence - The fence adjusts easily with just one hand, and locks firmly in place with dual locks. A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end. Features a measuring scale that allows you to position the fence and make adjustments.

 

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences by Kreg - Kit includes 1ea 24″ x 32″ router table top w/phenolic router plate. 1 ea small & large uhmw featherboard & 1ea wooden featherboard. 1 router dust port, 1 pr mounting blocks for dust port & 6 ea 1/4″ x 20 star knob & bolt. Kreg kms7215 micro-adjuster for band saw and router table fences. 1 ea featherboard locking kit, 1 each fence stop block.

 

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences - Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup. 5/8″ and 3/4″ metal miter bars fit all standard miter slots. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. This innovative featherboard design provides consistent tension and maximum holding pressure created by unique split rail construction. Pre-load tension design maintains consistent pressure across face of the featherboard.

 

Woodtek 165551, Portable Power Tool Accessories, Routers & Trimmers, Fence Ass’y For 32″ X 24″ Cast Iron Router Table - 0 lbs. Tool-free adjustment of fence faces. Imported. ) Includes molded dust port with 2-1/4″ id, 2-1/2″ od and 4″ adjustable bit guard. Top fence scale allows for precise placement of stops, hold downs and other fixtures. Finely machined from 6061 aluminum extrusion with top and front t-slots for anchoring accessories fence faces are constructed of pvc coated mdf and adjust tool free. 1 lbs. The woodtek® deluxe 32″ router table fence is designed to fit the woodtek® 32″ x 24″ cast iron table 165-548 and will also fit most any top 1/2″ to 1-1/2″ thick and 26-1/2″ to 32″ wide. Net weight 11. Fence dimensions 3-5/8″ tall x 36″ long. Fence is easily tightened with tall, above-the-fence knobs and glides smoothly in dual tracks scales on the dual tracks can be zero-referenced for repeatable set-ups. Shipping weight 12. (Purchased separately.

 

SUPREME ROUTER TABLE FENCE KIT By Peachtree Woodworking – PW1073 - The dust port system allows you to attach a 2-1/2″ shop-vac hose directly to the back of the fence. Fence will accommodate bits up to 3-1/2″ in diameter. (1) uni-fence stop block, (6) 1/4″ x 20 knob and bolts. Kit includes (1) 32″ pre-drilled aluminum fence, (1) pair 16″ aluminum fence sections. (1) pair dust port mounting blocks, (1) router dust port (1) small plastic featherboard.

 

24″ L Table Fence Pre-drilled By Peachtree Woodworking – PW1097 - Can be used with all kinds of shop built jigs & tables. L shaped aluminum ready to mount on the router table or other setups. Also available in 32″ (sold separately). Can mount on a drill press table, router table, band saw fence & many other tools. 24″ fence has two 3/8″ slots for mounting.

 

Drill Press Extension Table with Fence - Ergonomic handle exerts directional pressure against the fence. Auto-retracting heel technology hooks the tail-end of your board. Made in the usa a true microjig innovation. Optional mounts for deflector/connector shield plate for additional protection against chip debris. Proprietary green grr-rip for extreme hold. 90-degree flipguide for vertical footing on bandsaws and router tables. 90-degree flip guide for vertical footing on band saws and router tables.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.