ToolUSA Premium Chasing Hammer With Combination Steel And Rubber Block: KIT-TJ9804RUB
- Hammer handle is made of solid hardwood, with a bulbous handle to give you a full grip. The combination block is great for shaping metal, the rubber side prevents scratching and sparks. Chasing hammer head has a flat, round 1 inch striking surface. An excellent set for any professional work bench, prevents marring of metal. Hammer is 10″ long overall, with a forged steel head measuring 2 1/2 inches across.
3 Jewelers Hammers Chasing Silversmithing Goldsmithing Repousse Mechanic
- 1pc, 4oz ball pein, unlike other ball pein hammers, both ends of the head are turned on a lathe and then polished to a high finish. 9″ long overall. 2 ounce model is 9″ long overall, while the 4 ounce model is 9-1/2″ long. 1pc, 19mm goldsmiths, has a slightly domed, highly polished face. Each head is fitted securely onto the wood handle and pinned through the side for added strength. 2oz brass silversmith jewelers hammer. Well balanced and nicely finished. For light hammering and riveting. Note styles of heads and handles may vary from what’s shown.
1-1/4″ CHASING HAMMER JEWELRY MAKING HAMMERS BOWED FACE 1-1/4″ – 32mm DIAMETER (E 7) NOVELTOOLS
- Chasing chasing hammer designed for striking chasing tools or flattening used in decorative metal work by silversmiths, gunsmiths and by blacksmiths an ideal hammer for anyone who is involved in creative hand worked art a very well made chasing hammer, the hammer head is forged, the working surface is smooth with a polished finish the face of the chasing hammer is slightly bowed and is used for flattening and working with chasing tools peen head of the chasing hammer can be used for riveting and metal design and texturing. Chasing hammer 32mm, 1-1/4″ diameter jewelry metal-smith hobby & craft, hammer slightly bowed face-.
German Style Chasing Hammer, 32 Millimeter Face, 6 Ounces | HAM-162.00
- The 32mm (1-1/4″) face is flat and the pein side is slanted for better ergonomics when striking metal. This is a more popular style with european silversmiths, and preferred by many worldwide. The handle is hardwood featuring a wedge and oblong hole to keep the head from turning. The 6oz. “german style” chasing hammer is a high quality tool. Head is high grade stainless steel which has been case-hardened for long life.
Premium Chasing Hammer with Flat Face 1-1/8″ Dia
- Chasing hammer designed for striking chasing tools or flattening used in decorative metal work by silversmiths, gunsmiths and by blacksmiths an ideal hammer for anyone who is involved in creative hand worked art. Heads weigh approximately 8oz 10 1/2″ inch long 1 1/8″ inch face. A very well made hammer, the head is forged, working surfaces are highly polished the face of the chasing hammer is bowed (slightly domed) and is used for forming and working in chasing peen head of the chasing hammer can be used for riveting and metal design and texturing. Ace chasing hammer, jewelers hammer.
OKSLO PPI 10-1/2 Inch Ballpein Style Chasing Hammer – Drop Forged – 1-1/2 Inch Striking Su
- 10-3/8 inches long. Head is secured on handle with a metal wedge. Weighs 4 ounces. Great for striking chasing tools or flattening. Made of drop-forged steel, mounted on hardwood handle.
Hammer Set, Fretz HMR-C Chasing Hammer Set
- Set hmr, c includes hmr, 17 chasing hammer hmr, 19 janus chasing hammer hmr, 20m classic chasing hammer-medium hmr, 417 precisionsmith chasing hammer hmr, 20 classic chasing hammer-heavy.
Planishing Chasing Hammer
- Ideal for striking & flattening. Smoothing metal. Chasing hammer. Quality tools for all your jewellery projects. Multi-usage hammer for chasing, chiselling, riverting or peining.
Fretz HMR-20M Classic Chasing Hammer Medium Model
- The head on the hmr-20m fretz chasing hammer is cast from 420 stainless steel and then hardened to 50c on the rockwell scale, but keep in mind that the fretz chasing hammers are the only hammers in the fretz collection that are meant to be used against a tool and not directly on metal, meaning that the polished head may become marred during normal use. Because all fretz hammers are hand finished, variations in head diameter size can occur, as no two hammers are exactly alike. As with any hammer you use, eye protection is required. Fretz classic shape chasing hammer-medium model 1 1/4″ head diameter by 2-5/8″ head length hmr-20m bill fretz has just added another chasing hammer to his growing line of superb jewelers hammers. This is classic styled chasing hammer, medium model, hmr-20m. Both these classic style chasing hammers have similar shaped heads, the only difference being the length and weight. Similar in style to the german and french made chasing hammers that have been sold in the united states for generations, the medium model name differs this chasing hammer from the heavy model, which has a heavier and longer head. Bill fretz says that properly hardened chasing tool (chasing tools that are hardened on the working end-but not the striking end) should show mushrooming on the striking end of the tool during normal use. Fretz classic chasing hammers have a highly polished cast stainless steel head with a slightly domed 1-1/4″ (31mm) diameter hammer face with a ball pein end. Marring on the face of this hammer will not affect the intended use of the hammer in any way. Now for around the same price that you would pay for the german or french chasing hammers, you can now have a genuine fretz hammer, with a highly polished stainless steel cast head and the best handle in the business, made of paduck, a type of rosewood that makes one beautiful handle.
5″ Bowl Pad, Red Pitch & Chasing Hammer |Silversmith | Goldsmith | Metalsmith | Tool Set
- High quality tools blending age old traditions with advanced technologies, our tools are made of the finest carbon tool steel, hand forged, heat treated and tempered by our own expert craftsmen each tool is polished, sharpened and brushed to keep uj ramelson on the cutting edge in serving the woodcarver, jeweler, artist, student and hobbyist well into the 21st century. Safety when handling molten pitch, wearing eye protection and a long sleeve shirt are an absolute must molten pitch can cause nasty burns. Bowl the 5″(inside measurement) cast iron pitch bowl with the proper sized rubber pitch bowl pad bowls can be titled to extreme angles. Hammer chasing tool hammer 1 1/4″ 55oz best-selling hammer for chasing tools lightweight and easy to handle. German red pitch german red pitch is preferred by many silversmiths because it is less brittle than black pitch and has much greater plasticity at lower temperatures it is far less toxic and easier to use than black pitch and yields better results.
3 Chasing Hammer Repousse Silversmithing Goldsmithing Gunsmithing
- ✅ Overall length 10″ lightweight and easy to handle. ✅ Equipped with revolver-style handles and well finished. ✅ great chasing hammers for silversmithing, goldsmithing and gunsmithing. ✅ Each has a large face for flattening and a ball-peen side for riveting and metal design the forged head is wedge mounted on a wooden handle.
YUKISTORE | German Style Chasing Hammer 1″ Clock Repair Tool
- Please email if you have any questions. The 25mm (1″) face is flat and the pein side is slanted for better ergonomics when striking metal. Paymentplease send the payment for your item within 7 days of winning the item. I ship products using usps. I accept the following payment methodspaypalshippingi am happy to get your item to the post office within 24 hours after i receive your payment. The handle is hardwood featuring a wedge and oblong hole to keep the head from turning. German style chasing hammer 1″ “german style” chasing hammer is a high quality tool. I use high grade kraft bubble envelopes for shipping most items. The 3 oz. Returns and refundsreturn. This is a more popular style with european silversmiths, and preferred by many worldwide. Head is high grade stainless steel which has been case-hardened for long life.
YUKISTORE | Chasing Hammer 1″ Clock Repair Tool
- I use high grade kraft bubble envelopes for shipping most items. I ship products using usps. I will accept returns, within 30 days of close of transaction. The 3oz. Please email if you have any questions. Our chasing hammers are without question the best in this price range. I accept the following payment methodspaypalshippingi am happy to get your item to the post office within 24 hours after i receive your payment. Slightly rounded faces with an overall length of 11. Forged head is wedge-mounted on a hardwood handle. Returns and refundsreturn policy, we are proud to offer 100% satisfaction guarantee. Paymentplease send the payment for your item within 7 days of winning the item. The pein side is for riveting and metal design. Chasing hammer 1″ this chasing hammer has a 25mm -1- face for striking chasing tools or flattening.
Chasing Hammer 1 Inch Face
- Complete with hardwood handles. Round end is for forming decorative patterns and designs. Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools.
German Style Chasing Hammer, Handle Only | HAM-160.50
- Great for replacing the handle on ham-160-200. Handle is ergonomically shaped for a comfortable hold. Handle is made of hardwood.
Peddinghaus Chasing Hammer #52.02
- All items made in germany. Peddinghaus hammers are ideal for raising, forming, planishing and embossing. Not only does their line include top quality hammers, but anvils and stakes as well. They are made from fine grade steel with highly polished surfaces.
HAWK Premium Chasing Hammer | Ball Pein Forged Opposite Head – PH250
- The flat end of the hammer has a 15/16 inch diameter striking surface for flattening. This classic hammer is 10 inches long overall, with a bulb shaped handle end. This hammer has a forged steel head, and is excellent for all your metal work. The rounded end of the hammer head is 5/8 inch in diameter, used for bending. The solid 9-3/16 inch wood handle is wedge-mounted, and has a bulb shaped end that’s 25-inches long.
9-3/4 Inch Dome Head Chasing Hammer With 1 Inch Striking Surface And Wooden Handle
- This dome head chasing hammer is 9-3/4 inches long, and weighs 44 ounces. Ideal hammer for the jeweler’s bench for flattening and bending metal. The smooth wooden handle is comfortable to hold, and a pleasure to use. The slightly convex shaped head has a 1 inch striking surface.
3 Chasing Hammer Repousse Silversmithing Goldsmithing Tools Ball Peen
- Hammer is 10″ long overall, with a forged steel head measuring 2 1/2 inches across. An excellent set for any professional work bench, prevents marring of metal. Hammer handle is made of solid hardwood, with a bulbous handle to give you a full grip. Chasing hammer head has a flat, round 1 inch striking surface. The combination block is great for shaping metal, the rubber side prevents scratching and sparks.
ToolUSA Dual Head Dome Chasing Hammer: PH-90250
- The slightly convex head has a striking surface of 1 inch-excellent for shaping. This chasing hammer is 10-1/2 inches long overall with wooden handle. The handle is made of solid hardwood in a bulbous shape for better control. This hammer is designed for shaping and forming sheet metals-ideal for jeweler’s bench. The rounded ball shaped head has a diameter of 3/8 inch-perfect for metal work.
SE 8340CH-P Chasing Hammer, 10″
- Se 8340ch-p 10″ chasing hammer is an essential tool for jewelers, artisans, metalsmiths, machinists etc.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
