18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 1/2″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-3/4″ Length (Pack of 25)
- Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #8-15 Thread Size, 1″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 50)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 3-1/2″ Length (Pack of 10)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
#12 x 3″ Hex Washer Head Self Drilling Sheet Metal Tek Screws Qty 25, 410 Stainless Steel, Self Driller Number 12 Size x 3″ Length
- The sharp threads draw material together and ensure a secure hold. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. Fastenere self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 50)
- Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 3/4″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Flat Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Flat head has an 82-degree cone shape for use in countersunk holes and a flat top that fits flush with the mated surface.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 25)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 1″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #6-18 Thread Size, 1″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type B, 5/16″-12 Thread Size, 3/4″ Length (Pack of 5)
- Type b point has a blunt tip with fine spaced threads that are suitable for forming threads in holes drilled in 0015″- to 0050″-thick metals as well as nonferrous castings, plastics, and impregnated plywood. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Hex Washer Head, Hex Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 25)
- 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)
- Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #2-32 Thread Size, 1/4″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-1/4″ Length (Pack of 25)
- Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #10 Thread Size, 1 3/4″ Length (Pack of 50) (Fits Tuf-Tite Risers and Lids)
- Perfect for tuf-tite risers & tuf-tite lids, as well as many other applications. 18-8 stainless steel provides good corrosion resistance and strength. Type a point has a conical tip and spaced threads. Phillips drive has an xshaped slot that accepts a phillips driverdesigned to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #6-18 Thread Size, 1-1/4″ Length (Pack of 100)
- Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
