Top 22 Best Heavy Duty Impact Wrenches

 

1in. Dr. Extra Heavy-Duty Impact Wrench, CP897 - Handle exhaust keeps exhaust away from the operator. Twin hammer high performance clutch for longer life under tough conditions. 1,200 ft/lbs of ultimate torque providing power to loosen the toughest fastener. Efficient 6 vane motor, power with any 1/2-inch hose air supply. 3 position regulator and directional control, one lever for all controls.

 

Performance Tool M627 3/4-Inch Drive Heavy Duty Impact Wrench by Performance Tool - Maximum power and torque for heavy duty automotive, farm and truck applicationsring socket retainer allows for rapid socket changesfront and rear bumper guards.

 

Chicago Pneumatic CPT-724H Extra Heavy-Duty Impact Wrench, 0.37 in. - Item weight, 36 lbs. Differential regulator allows the operator to match the requiredpower to the job. Handle exhaust directs air away from the workpiece and operator. Transmissionsexhaust systemsbody shopsgeneral repair in the 3/8 inch range. Improved oil bath dyna-pact clutch delivers higher perfor-manceand extended durability.

 

Chicago Pneumatic CP726H 1/2-Inch Heavy Duty Air Impact Wrench - With 1680 blows per minute. 55 pounds. Lightweight at 3.   This heavy duty impact wrench features a working torque range of 40-170 ft. Overall depth, front to back -7. 25 inches.   Average air consumption 3 cfm air inlet thread 1/4″ nptf minimum hose size 3/8″, sound dba 94. Square drive size -1/2″. Cpt726h features -dyna-pact oil bath clutch delivers smooth operation and extended durability. -Maximum torque 200 ft. 1 lbs. 5 inches. 5 inches. Generic dimensions -1/2” drive heavy duty air impact wrench. /Lb. Air comsumption (cfm) -0, 5. Anvil length -standard anvil. Overall width, side to side -7. Tools specifically designed for body shop applications, tire shops and general vehicle repair. Generic specifications -one hand push button forward/reverse power regulator, 4 positive power settings, full power in reverse. -Handle exhaust with 360 degree air inlet swivel to prevent hose kinks. -Great tool for transmission work, exhaust systems, bench work, body shops and general repair. Overall product weight -3. /Lbs. Dimensions overall height, top to bottom -2. And 6″ in length. Cp is a global leader for vehicle service tools with a wide range of high quality tools for the most challenging jobs on cars, trucks, buses, and off-road equipment. Max torque (ft-lb) -0, 199 ft-lb.   Free speed is 8,500 rpm.

 

Sunex SX821A 3/8-Inch Heavy Duty Impact Wrench - @90psi) 75, working torque (ft. ) 30-60 , free speed (rpm) @ 90psi 10,000, air inlet 1/4, recommended air pressure 90, avg. 8. Lbs. Torque (ft. When you need performance, you need sunex tools air tools. The tools you need to get it done-whether drilling, driving, grinding, cutting, sanding, spraying or hammering, sunex tools air tools supply you with power, flexibility and exceptional value. Air consumption 4, sound level 84, length 5, weight 2. Specifications square drive 3/8, max. Lbs.

 

8 PC Steel Constructed 1″ Impact Wrench Socket Set Heavy Duty Black Finish - Drop forged. Heat treated with black finish. Own this brand new high quality, heavy duty 8 pc 1″ socket set. This product is great for heavy duty application in the home, farm or shop and features steel sturdy construction. Sizes 13/6″, 7/8″, 15/16″, 1-1/16″, 1-5/8″, 1-1/2″, 1-3/8″, 1-1/4″.

 

3/4″ heavy Duty Twin Hammer truck Air Impact Wrench - 5″ free speed 4600 rpm maximum torque 1200ft/lb, 1600nm 6 torque positions 3 forward & 3 reverse bolt capacity 1. It is perfect for major engine teardown or any most mechanics application. 3″ air inlet 3/8″ air pressure 6. 3 bar @ 90 psi. This impact wrench is suitable for high volume auto repair work on trucks, tires, and heavy duty equipment. Specifications super duty 3/4″ twin hammer air impact wrench kit components with durable and heavy duty materials square drive 3/4″ anvil 1.

 

Briggs & Stratton 6381-00 1/2″ Heavy Duty Impact Wrench - . Includes a 1-year limited warranty. 7,000 rpm and 500 ft. The briggs & stratton heavy duty 1/2-inch impact wrench is great for automotive, general assembly work, and removing lug nuts from tires. The rubber grip provides added comfort during extended use., Lbs. Extended warranty available. Of torque provide enough strength to get the job done.

 

Chicago Pneumatic CP724H 3/8-Inch Drive Heavy Duty Impact Wrench by Chicago Pneumatic - Improved oil bath dyna-pact clutch delivers higher performance and extended durabilitydifferential regulator allows the operator to match the required powerhandle exhaust directs air away from the workpiece and operator integral 360 degree air inlet swivel keeps air hose from being twisted and kinkedultimate torque 200 ft. Applications transmissions, exhaust systems, body shops, general repair in the 3/8-inch range. -Lbs.

 

Snap-On 3/4 Drive Heavy Duty Impact Wrench, Part #MG1250 - Durable magnesium gear case, all metal transmission, heavy-duty impacting mechanism directs torque to fastener without kickback. Snap on 3/4 drive impact wrench. 300 ft-lbs of maximum torque,1,650 rpm/2,600 bpm for fast application speed. Comfort grip provides maximum comfort. Preferred rocker switch design for fast and easy fastening.

 

SP Air Corporation SP-1158 Heavy-Duty Impact Wrench, 3/4″ - Handle air exhaust directs air flow away from work and reduces noise level. 1,200 ft/lb max torque, higher torque for stubborn fasteners and lightweight aluminum housing weighing 15 lbs. Sealed-in oil bath lubrication always keeps impact mechanism lubricated for less wear and longer tool life. Made in japan. Regulator system allows mechanics to maintain full power in multiple directions.

 

1″ Heavy Duty Impact Wrench w/6″ Ext & #5 Spline - 1″ drive heavy duty impact wrench with 6″ extension and #5 spline.

 

Chicago Pneumatic Tool CP7769-6 Heavy Duty 3/4-Inch Impact Wrench with 6-Inch Extended Anvil and Composite Housing - The chicago pneumatic cp7769-6 3/4″ heavy duty impact wrench with s2s (side to side forward / reverse) with 6″ extended anvil. Great power at 1440 maximum torque in reverse. Low air consumption air motor. Lightweight with composite handle/motor housing and magnesium clutch housing.

 

Chicago Pneumatic Tool CP7782-6 Heavy Duty 1-Inch Impact Wrench with 6-Inch Extended Anvil - The chicago pneumatic cp7782-6 1″ heavy duty impact wrench with 6″ extended anvil has great power for the toughest jobs on truck, bus and heavy equipment applications. Regulator with integrated forward/reverse with 3 position power settings in both directions. Ergonomic side handle and socket retainer ring combined with hole retainer. .

 

Chicago Pneumatic CP8272-D 3/4-inch Drive Heavy Duty Pneumatic Impact Wrench New - 3 power settings in forward, full power, and in reverse. The cp8272-d 3/4-inch pneumatic impact wrench chicago pneumatic tool is powerful and easy to control for precise assembly, low noise level and vibration combined with lightweight for comfort while in use. 1-inches long. 3lb, and is 9. Weighs in at 7.

 

Klutch Heavy-Duty Air Impact Wrench – 1in. Drive, 2500 Ft.-Lbs. Torque, 5,000 RPM, 8in. Anvil - Delivers up to 2500 ft. Forward torque to loosen the most stubborn bolts. -Lbs. 1 1/4, hammer mechanism twin hammer, speed, no load rpm 5,000, tool weight lbs. Square drive has an 8in. 2,500, impacts per minute ipm 700, variable speed yes, working torque ft. Reverse torque ft. Hose size in. -Lbs. Tough wrench has both a d-handle and side handle for better comfort and control when operating. The klutch heavy-duty 1in. Working torque 5000 rpm free speed 700 ipm in impact mode twin hammer design for hard-hitting impacts d-handle with inside trigger for comfort and control side support handle for better control forward/reverse switch 1in. 1800, inlet size in. 1/2, noise level db 97, standard bolt capacity in. 1, tool length in. 400-1,800, min. Operating psi 90, reversible yes, case included no, forward torque ft. Forward torque 400-1800 ft. Torque in reverse 1800 ft. 20 3/4, max. 2,500, average air consumption cfm 10, max. -Lb. Its twin hammer design produces hard-hitting impacts. The 1in. Air inlet 1/2in. Max. Minimum hose size. Extended anvil to expand your reach. -Lbs. Square drive 8in. Of torque in reverse and 1800 ft. Extended anvil for expanded reach 10 cfm average air consumption 1/2in. Torque ft. -Lbs. This heavy-duty impact wrench can handle the toughest applications in your garage or shop. Max. -Lbs. 24. -Lbs. 3. 1/2, drive in. Air impact wrench delivers a whopping 2500 ft. -Lbs. -Lbs.

 

Performance Tool M627 3/4-Inch Drive Heavy Duty Impact Wrench - Lever select direction change for quick and easy operation, built in regulator with 3 forward and 3 reverse speeds. The wilmar m627 3/4-inch drive heavy duty impact wrench, with durable aluminum housing, and powerful twin hammer clutch to provide maximum torque and smooth operation while generating up to 950 ft/lbs of torque and 762 blows per minute. Pin lock hole for oversized sockets, and socket retaining ring for rapid socket changes. .

 

FIT TOOLS 3/4″ Heavy Duty Dr. Pneumatic Impact Wrench - Digital torque 510 ft / lbs (690nm) 5. Specification 1. Torque 800 ft / lbs (1085 nm) 4. 5 cfm 7. Square drive 3/4 ” dr 2. Air inlet 1/4″ 9. Free speed 5500 rpm 6. Avg. 2 bar) 8. Air cons 4. The max. Working pressure 90 psi (6. Air hose 3/8″ id. Max. Working torque range 60, 730 ft / lbs (80-990nm) 3. Torque is 800 ft / lbs (1085 nm) 8 position for tightening selection. Our 3/4″ air impact wrench is low weight but with high torque.

 

Chicago Pneumatic (CPT7782SP6) 1″ Drive Heavy Duty Impact Wrench with 6″ Extension and #5 Spline - Satisfaction ensured. Package quantity 1. Wrench with socket set #5 spin. Excellent quality. Great gift idea.

 

STEELMAN 2731 Silver/Black 1/2-Inch Heavy Duty Impact Wrench - It comes equipped with a twin hammer impact mechanism for 1/2-inch drive with an average air consumption of 4 cfm. Whether working at home or in a professional shop, the steelman twin hammer can assist with rotating tires or performing basic maintenance. . Twin hammer with 400 foot-pound of torque offers excellent performance.

 

Ingersoll-Rand 285B 1 Heavy Duty Impact Wrench by Ingersoll-Rand - 1,450 ft-lb maximum torquehigh-effeciency, 6-vane air motor3-position power regulatorincludes protective boot.

 

3/8 Inch Heavy Duty Impact Wrench-2pack - 3 speed positions control gives more control when tightening fasteners, full power reverse for easier removing of fasteners. Twin hammer mechanism is durable and hard hitting using fewer parts and less down time. Auxiliary side handle is adjustable to any angle for maximum control made in japan. 1,800 ft/lb max torque, higher torque for stubborn fasteners and lightweight aluminum housing weighing 15 lbs. 3/8 inch heavy duty impact wrench-2pack.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.