Top 22 Best Scarifiers

 

SASE SC08E 8″ Concrete Scarifier Planer Grinder 5.5 HP Honda Engine + Drum - Scarifier featuresheavy-duty hex shaft holds drum in place and is very durable. Easy handling, weighing 92 lbs this scarifier is easy to transport and perfect for any job. Includes the following with purchase sc08e 8″ gas powered scarifier -free- sc08e drum + tungsten cutters installed ($492. 00 value) technical data required power gas powered motor. This machine features a heavy-duty hex shaft that holds the drum in place, easy side access for drum assembly / changing, easy handling and lightweight, all while performing incredibly well for any surfacing needs. 020 a compact scarifier / planer that has uncompromising performance for its small size. The sase sc08e scarifier is a compact scarifier/planer that has uncompromising performance for its small size. Engine horsepower 5. This item ships via small pallet using old dominion freight lines, it cannot ship via ups, please be prepared for pallet delivery at the address you provide. Connects to the sase bull 45 vacuum ( or any other industry 2″ hose vacuum) for dust-free use. 00 and is included with your purchase. Sasesc08 scarifier model # sc. 08. Included with this machine is a free, loaded with tungsten carbide, sc08e tungsten drum, this drum retails at $492. Gas powered side access drum assembly allows for fast & easy changes of drum / cutters. All replacement parts are available for this machine. An affordable means of scarifying & floor prep. 5hp weight 92lbs dimensions 47x14x34-42 inches shippingships via small pallet using old dominion freight lines freight company. Equipped with an emergency stop safety cord to kill the machine during an emergency. This machine is ideal for any kind of concrete removal, prep, or asphalt/concrete work or removal. All replaceable parts are available, such as the wheels, drums, bearings etc. Not recommended to ship via ups due to damage to the motor / machine. Ideal for any kind of concrete removal, prep, or asphalt/concrete paint removal.

 

5 pt Carbide Flail Cutter Consumables Kit for Sase® SC8E® Scarifier/Planer – General Setup - Replacement kit designed for sase® sc8e® scarifier/planer. 72 pcs of 5 point 1-3/4″ carbide flail cutters. 4 pcs of 12mm hardened steel shafts. Includes long lasting cutters, shafts, and spacers. 104 pcs of hardened steel spacers with 8 extra spacers free (112 total spacers).

 

Kraft Tool Plaster and Stucco Scarifier 16-inch Pro Form Handle - . All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. Used to easily scratch undercoats so finish coat will bond and not separate.

 

MK Diamond 158943 SG-9 Gas Scarifier with 18 Point Steel Sharp Tooth Drum - Unique engage/disengage lever allows the operator to raise and lower the drum without losing the depth setting. Drums available to provide cleaning, texturing, leveling, grooving and paint removal. Drums are interchangeable and provide for fast and easy changeover. Designed to leave a clean, textured or rough finish on any type of concrete or asphalt surface.

 

Swisher 16195 Scarifier Bucket Tooth Kit - L x 5in. S. Its heavy-duty design is great at breaking through compacted soil mounds and other materials. H, accessory type parts/hardware, compatible with universal dump bucket, dimensions l x w x h (in. A. Color black, size 44in. U. ) 44 x 5 x 2 3/4, material type steel, mounting hardware included yes, water resistant yes. W x 2in. This set of rugged swisher scarifier teeth kit gives the universal dump bucket (item# 2500875, sold separately) traction when loading dirt or rock.

 

5 pt Carbide Flail Cutter (1.73″ OD x 0.63″ ID x 0.24″ W) – Scarifier Accessories and Consumables (50 pcs) - Many other scarifier accessories available upon request to our customer service department. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. They also work great to remove traffic lines, pavement markings, epoxy, paint, and waterproofing membranes. Altcut’s carbide flail scarifier cutters are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with many of the most popular scarifier/concrete planer machines, such as airtec®, bartell®, blastrac®, diteq®, edco®, kut-rite®, sase®, smith mfg®, and von arx®. . Note all sizes and dimensions are approximate.

 

Scarifier for Concrete and Asphalt with Lifan Engine 9 HP - Included vacuum port equipped. The scarifier sc-9 is used to prepare and repair the concrete and asphalt floors. It also has variable speed control and regulation in the depth of cut. Dimensions w x l x h (in) 20 x 36 x 33 engine make / model lifan engine power (hp) 9 hp engine type air-cooled single-cylinder four-cycle engine rpm 3600 start method recoil fuel gasoline fuel consumption us gal/h 0. 71 fuel capacity (qt) 5. 4 working width (in) 9 depth of cut per pass (in) 1/8 surface capacity scarification (ft²/h) depending on soil & environmental factors 350-500 traffic line removal capacity (ft²/h) depending on soil & environmental factors 800 power transmission from drive motor via centrifugal clutch and v-belt direct to axis. The scarifier has a robust chassis, which increases the equipment life and reduces the level of vibration, bringing to the operator more comfort during the job. It is applied to the following services pinking the floor to receive new flooring, create non-slip furrows, remove traffic lanes and clean surfaces of floors in general.

 

Kraft Tool Plaster and Stucco Scarifier 8-inch Pro Form Handle - Used to easily scratch undercoats so finish coat will bond and not separate. All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. .

 

MK Diamond 158584 Replacement Drum with 6 Point Carbide Cutter for SG-9 and SG-5 Series MK Diamond Scarifier - Scarifier drums come in a variety of cutter combinations to provide different speeds, removal rates and profiles. 6 point carbide cutter is long lasting and fast milling of concrete, asphalt or coatings. Drum weighs 30 pounds.

 

Kraft Tool Plaster and Stucco Scarifier 6-inch Pro Form Handle - All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. Used to easily scratch undercoats so finish coat will bond and not separate.

 

QLT By MARSHALLTOWN 723 12-Inch Blue Steel Scarifier with Structural Foam Handle - Comfortable handle is attached to a non-corrosive aluminum backer plate. Made of lightweight yet sturdy, flexible blue steel. 1/4″ wide, 3″ long tines will easily scratch the plaster undercoat to promote a good bond with the finish coat.

 

Bon 13-117 12-Inch Spring Steel Scarifier, 3-Inch Tines - Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat. Available in several size options. .

 

Draper 34276 135mm Plastering Scarifier by Draper - Head-to-handle connection has a bolted design. Draper 34276 135mm plastering scarifier. Marshalltown scarifier 8. Red, metal rake head.

 

Bon 13-192 14-Inch Spring Steel Scarifier, 3-Inch Tines - Available in several size options. Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat. .

 

Kraft Tool Plaster and Stucco Scarifier 12-inch Pro Form Handle - All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. Used to easily scratch undercoats so finish coat will bond and not separate. .

 

6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-8® Scarifier/Concrete Planer – General Setup - Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the edco® cpm-8® scarifier/concrete planer. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Note all sizes and dimensions are approximate. Many other scarifier accessories available upon request to our customer service department. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Drum and bushings sold separately.

 

8 pt Carbide Flail Cutter Complete Drum Kit for Sase® SC10E® Scarifier/Planer – General Setup - Fully assembled and ready for use. Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the sase® sc10e® scarifier/planer. Many other scarifier accessories and configurations available upon request to our customer service department. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. . Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Note all sizes and dimensions are approximate.

 

Bon 13-118 16-Inch Spring Steel Scarifier, 3-Inch Tines - Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat. Available in several size options.

 

5 pt Carbide Flail Cutter Complete Drum Kit for Von Arx VA25 Scarifier/Concrete Planer – General Setup - Complete drum replacement kit designed for von arx® va25® scarifier/concrete planer. Includes fully assembled drum with long lasting cutters, shafts, and spacers. 99 pcs of hardened steel spacers. 6 pcs of 12mm hardened steel shafts. 81 pcs of 5 point 1-3/4″ carbide flail cutters.

 

5 pt Carbide Flail Cutter Consumables Kit for Bartell SP8 Scarifier/Concrete Planer – General Setup - 128 pcs of hardened steel spacers with 12 extra spacers free (136 total spacers). Replacement kit designed for bartell® sp8® scarifier/concrete planer. 4 pcs of 12mm hardened steel shafts. 64 pcs of 5 point 1-3/4″ carbide flail cutters. Includes long lasting cutters, shafts, and spacers.

 

6 pt (TCT Carbide) Fail Cutter Drum Assembly Compatible Edco CPM-8 & Smith Mfg SPS8 Scarifier – General Setup - 210 pcs of hardened steel spacers. 78 pcs carbide flail cutter n/p 186125-6f. 6 pcs of 1/2″hardened steel shafts. Complete deluxe bushed drum. Drum n/p 62080656.

 

Bon 83-135 12-Inch Plaster Scarifier with Plastic Handle by BON - Fan-shaped steel rake head. Red, metal rake head. Head-to-handle connection has a bolted design. Bon 83-135 12-inch plaster scarifier with plastic handle.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.