Norton Metalite R265 Abrasive Flap Wheel, Threaded Shank, Aluminum Oxide, 1″ Dia., 5/8″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Versatile usage provides low cost operations. Aluminum oxide is durable and the most common abrasive grain. Flexible cotton backing, provides a soft action with flexibility for a nicer finish. Resin bonds have good heat and moisture resistance, and retain abrasive grains well. Variety of sizes and grits available offer flexibility.
D.H.S. Medium Duty Nylon Furniture Levelers – 1/4″ Threaded Shank w/T-Nuts – 400 Lb. Total Capacity – Adjusts from 0″ to 3/4″ – Set of 4
- Plenty strong, each leg can support 100 lbs so a set of 4 can handle furniture pieces as heavy as 400 lbs. Floor friendly, the nylon foot is an inconspicuous 3/4″ in diameter and is kind to hardwood floors. You get, 4 levelers & 4 t-nuts. Easy peezy installation, drill a 5/16″ hole in each corner, tap in t-nuts, screw in leveler done. Lots of adjustment, each leg can be adjusted from 0″ to 3/4″ plenty for even the most out-of-whack floors.
Drill Bits Short Length Threaded Shank, Short Series Drill Bit Set 3 Tight Fit Tools 00133
- Drill bits comply with national aerospace standard nas965 drill bits are american made. Drill bits are black oxided to prevent chip-to-tool welding and corrosion all items ship usps. Three lengths of drill bits longs=2-3/8 inches shorts=1-1/2 inches stubs=3/4-7/8 inch. 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit. Drill bits are made of m7 high-speed steel (hss), for drilling hard materials.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 5/8″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide. Cloth backing is stiffer, tougher, and thicker than a paper or film backing. High-performance flap wheel is aggressive and works well for high stock removal. 1/4″-20 threaded spindle for use on threaded toolholding systems. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces.
Bosch 82816 1/4-Inch Threaded Shank for Mortising Bits
- Micrograin bits cut fast for mortises when work is started at the edge and provide a smooth finish cut that is ideal for surfacing operations. Useful when good chip clearance is important, especially in gummy wood.
Precision Twist TS10 High Speed Steel Threaded Shank (Short Series) Drill Bit, Black Oxide Finish, Threaded Shank, Spiral Flute, 135 Degree Point Angle, 1/4″
- Nas 907 type 965 standards, for use in the aerospace industry. Threaded hex shank, quickly threads into drills and drill attachments. 135-degree split-point angle, for self-centering, to reduce walking, for use with hard materials, and to reduce pressure on cutting edges. Steam tempering (also called black oxide) finish, to retain cutting fluids and to prevent chip-to-tool welding. Short-length, for a wide range of applications.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 1″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. 1/4″-20 threaded spindle for use on threaded toolholding systems. Cloth backing is stiffer, tougher, and thicker than a paper or film backing. High-performance flap wheel is aggressive and works well for high stock removal. Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide.
LDR 551 6415WT Faucet Hole Cover – 1/2-Inch Threaded Shank, White
- -Application bathroom faucet and kitchen faucet. Product type -hole cover. Overall depth, front to back -4″. Application -bathroom faucet/kitchen faucet. Overall product weight -0. Finish -white. -White finish. 09 lbs. Dimensions overall height, top to bottom -2″. 551-6415wt features -hides sink holes that are not being used.
Drill Bits Short Length Threaded Shank, Stub Series Drill Bit Set 4 Tight Fit Tools 00134
- Drill bits are made of m7 high-speed steel (hss), for drilling hard materials. Three lengths of drill bits longs=2-3/8 inches shorts=1-1/4 inches stubs=3/4-7/8 inch. Drill bits are black oxided to prevent chip-to-tool welding and corrosion all items ship usps. Drill bits comply with national aerospace standard nas965 drill bits are american made. 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
Milwaukee 49-57-1125 Steel Hawg 1-1/8-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- For use with no 3 morse taper arbor assembly 49-57-0010. The product is manufactured in japan. Metric thread size m18 x 15 shank. 1-1/8 in bit diameter. The product is easy to use. 2 in cutting depth. The product is durable.
uxcell 1/2″ x 20UNF Mount 21mm Male Threaded Shank Drill Chuck Adapter 200mm Long
- Weight 416gpackage content 1 x drill chuck adapter. Screw diameter 58mm/ 023″max diameter 25mm/1″. Color graymaterial metal. Mounting 1/2″-20unftotal length 200mm/ 79″. Product name drill chuck adapterthread diameter 21mm/1/2″ ptshank diameter 19mm/ 075″.
Milwaukee 49-57-4620 Steel Hawg 4-5/8-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- The product is easy to use. The product is durable. Cuts steel, stainless steel, cast iron, or aluminum. 2-inch cutting depth. 4-5/8-inch bit diameter. The product is manufactured in japan. Metric thread size m18 x 15 shank. For use with no 3 morse taper arbor assembly 49-57-0010.
Drill America TSD Series M42 Cobalt Steel Stubby Length Drill Bit, Gold Oxide Finish, Threaded Shank, Spiral Flute, 135 Degrees Split Point, #43 Size (Pack of 25)
- Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 1″ Face Width, Grit 80, 30000 Max RPM (Pack of 10)
- Cloth backing is stiffer, tougher, and thicker than a paper or film backing. 1/4″-20 threaded spindle for use on threaded toolholding systems. High-performance flap wheel is aggressive and works well for high stock removal. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide.
Merit Super Finish Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 5/8″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. Cloth backing, for a stiffer, tougher, and thicker backing than paper or film. Ceramic aluminum oxide, a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide. 1/4″-20 threaded spindle for use on threaded toolholding systems. Super finish flap wheel conforms to the area being finished, helping to give a very smooth finish.
Milwaukee 49-57-1000 Steel Hawg 1-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- 2 in cutting depth. Metric thread size m18 x 15 shank. The product is easy to use. The product is durable. For use with no 3 morse taper arbor assembly 49-57-0010. 1 in bit diameter. The product is manufactured in japan.
Milwaukee 49-57-1062 Steel Hawg 1-1/16-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- For use with no 3 morse taper arbor assembly 49-57-0010. 1-1/16 in bit diameter. 2 in cutting depth. The product is manufactured in japan. The product is durable. The product is easy to use. Metric thread size m18 x 15 shank.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 2″ Dia., 1″ Face Width, Grit 40, 25000 Max RPM (Pack of 10)
- 1/4″-20 threaded spindle for use on threaded toolholding systems. Cloth backing is stiffer, tougher, and thicker than a paper or film backing. Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. High-performance flap wheel is aggressive and works well for high stock removal.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 1″ Face Width, Grit 40, 30000 Max RPM (Pack of 10)
- High-performance flap wheel is aggressive and works well for high stock removal. 1/4″-20 threaded spindle for use on threaded toolholding systems. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. Cloth backing is stiffer, tougher, and thicker than a paper or film backing. Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide.
Jacobs Chuck 7346D Threaded Shank to Morse Taper Arbor, 2 Morse 1/2″-20 Mount, 4-1/16″ Length
- Jacobs chuck threaded shank to morse taper arbor. Ideal for use with custom tool and work holder designs and for specialized machining applications. Shank type 2 morse taper. Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks. 9/16 threaded extension (l-1). . 1/2″-20 arbor thread. 4-1/16-inches length.
12cm Length 10mm Threaded Shank Stainless Steel Hoist Lifting Hook
- Product name threaded shank hookmaterial stainless steel. Color silver tone. Package content 1 xthreaded shankhook. Net weight 73g. Threaddiameter 10mm/04″total size(approx) 12 x 35 x 95cm / 5″ x 14″ x 05″ (lwh).
Bosch 92840 1/2-Inch Threaded Shank for 85130 and 85238, 3-Piece
- Designed to give excellent smoothness of cut. Specially designed tips provide fast plunge cutting. Balanced cutting with minimal vibration.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
