Top 22 Shank Drill Bits

 

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit, Bronze Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 1″ Size - Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Bronze finish lubricates the drill bit and provides wear resistance. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. Designed for drilling tough, high-tensile strength materials.

 

XCSOURCE 10pcs 6mm-19mm Magnetic Nut Driver Socket Adapter 1/4″ Hex Shank Drill Bit Power Tool Set BI489 - Made of cr-v steel, it is strong and sturdy. Widely used in home diy, carpentry, auto parts, specializing in machine repair. Long service life, high hardness, handle drill steady. Suitable for pneumatic screwdrivers, electric screwdrivers, pneumatic drill, drill, etc. Head with a strong magnetic, effectively reduce the course fall off.

 

Tooluxe 10055L Titanium Hex Shank Drill Bits with Quick Change Design | 30-Piece Set - Cuts through material roller forged and sharpened edges provide fast penetration. Quick-change design feature a quick-change ¼” hex shank to swap out bits. Titanium coat ultra strong, high quality titanium-coated drill bit set with ¼” hex shank for quick bit changes. Wide array of drill bits jobber length drill bits includes sizes ranging from 1/16″ to 1/2″. Adaptor included locks easily into in hex sleeves and quick release chucks, fit all power drills and includes quick change adaptor.

 

IRWIN Tools Black Oxide Hex Shank Drill Bit, 5/64-Inch (4935643) - 1/4-inch hex shank works in most lock-n-load quick-change extensions as well as most drill chucks. 12-piece set includes 1/16″, 5/64″, 3/32″, 7/64″, 1/8″ (2), 9/64″, 5/32″, 3/16″, 7/32″ and 1/4″ drill bits and a lock-n-load quick-change extension. These drill bits use a 135° split-point tip to start drilling quickly and minimize walking. 12-piece set includes 1/16″, 5/64″, 3/32″, 7/64″, 1/8″ (2), 9/64″, 5/32″, 3/16″, 7/32″ and 1/4″ drill bits and a lock-n-load® quick-change extension. Suitable applications include automotive, maintenance and repair, portable drills and stationary drill presses. 1/4-inch hex shank works in most lock-n-load® quick-change extensions as well as most drill chucks. Each drill bit is made with high-speed steel with a black oxide treatment to resist corroding.

 

Pack of 2 12″ Magnetic Bit Extension Holder Quick Change 1/4″ Hex Shank for Power Drill - Quick release 1/4″ hex shank. Material chrome vanadium steel cr-v/ steel w/ chrome plate. Pack of 2 12″ magnetic extension bit holder. Length 12″. 1/4″ hex shank fits all power drill/ impact driver and hand held driver.

 

Irwin Tools 4935636 Black Oxide Hex Shank Drill Bit, 1/8-Inch - The black oxide hex shank high speed steel drill bits feature a 135° split-point tip for faster starts with no walking they’re manufactured with premium high speed steel with a black and gold oxide coating for major corrosion resistance. This bit works in quick change impact drivers and because it has a quick change shank, you can change from drilling to driving quickly to get the job done fast. The irwin tools 4935636 1/8″ black oxide hex shank drill bit is a 2-piece black oxide drill bit designed to work with todays 1/4-inch quick change chucks and extensions.

 

Uxcell Bimetal Hole Saw Triangle Shank Drill Bit, 2 3/4-Inch Diameter - Package content 1 x hole saw1 x drill bit 1 x drill bit. Total length 96mm / 378inchmaterial metal. Product name hole sawused for wood, iron, aluminium alloy cuttingcutting diameter 70mm / 2 3/4inch. Color red & blacknet weight 266g. Shank diameter 10mm / 039inchhole saw depth 37mm / 146inchtwist bit diameter 6mm / 024inch.

 

ZRAMO HM008- 8Pcs Powerful Socket Adapter Impact Hex Shank Drill Bits Bar Set 1/4″ 3/8″ 1/2″ Bits New Tool - Chrome vanadium steel suitable for heavy duty impact drivers spring loaded ball bearing on head holds sockets securely. Suitable for quick change 1/4″ chuck systems or directly into drill chuck change your hand socket set into a driven socket set. Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert. Material chrome vanadium steel. This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool the 1/4″ hex shank fits all quick change chucks as well as standard drill chucks.

 

QST 8Pcs Socket Adapter Impact Hex Shank Drill Bits Bar Set 1/4″ 3/8″ 1/2″ Bits New(8P 1/4″ 3/8″ 1/2″) ¡­ - 2suitable for quick change 1/4″ chuck systems or directly into drill chuck change your hand socket set into a driven socket set. 8pcs ,the sizes included are 2 x 1/2″ drive, 2 x 3/8″ drive and 4 x 1/4″ drive, material cr-v. 3spring loaded ball bearing on head holds sockets securely this set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. 1suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert.

 

DEWALT DW2555 5/32-Inch Hex Shank Drill Bit - Split-point tip prevents walking. Black oxide coating provides longer life. Multi-purpose drilling in wood and metal.

 

Yosoo Pack of 2 – 1/4″ Impact Drive Shank Quick Change Holder Hex Bit Drill Chuck Adapter Magnetic - Hope understand. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Package includes 2pcs x hex shank bit. Features： length 60mm color black materialmetal notes this hex shank bit is not suitable for double interface bits. It is manual measurement, there may be 2-3cm error.

 

Huot Five-Drawer 1/2″ Reduced Shank Drill Bit Dispenser Cabinet for Sizes 33/64″ to 63/64″ in 1/64″ Increments - Five-drawer cabinet holds two each of 1/2″ reduced shank drill bits in fractional sizes from 33/64″ to 63/64″ in 1/64″ increments. Made of steel with an epoxy finish for durability and protection. Unit can be stacked with other huot dispenser cabinets. Labeled compartments for identification and organization. Made in usa.

 

Neiko 12008A Cobalt Coated 1/4-inch Hex Shank Drill Bits with Quick Change Design | 13-Piece Set - Fits all drills locks easily into in hex sleeves and quick release chucks and fits all power drills. Great value for home repairs and light jobs such as drilling into wallboard or hanging pictures and mirrors. Quick-change design quick-change ¼” hex shank lets you quickly swap out bits. A bit for every job includes 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 11/64″, 3/16″, 13/64″, 7/32″, 15/64″ and 1/4″ size drill bits. Added durability set includes 13 quick change drill bits coated with cobalt for added strength and longevity.

 

Baban 1/4 inch Hex Shank Drill Bits Screwdriver Bit Holder Screw Magnetic Drill Pack of 1 - Hex shank diameter -1/4 inch (635mm). This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool the 1/4″ hex shank fits all quick change chucks as well as standard drill chucks. Chrome vanadium steel suitable for heavy duty impact drivers spring loaded ball bearing on head holds sockets securely. Exclusive hex shank locking system. Suitable for quick change 1/4″ chuck systems or directly into drill chuck change your hand socket set into a driven socket set.

 

Irwin Tools 4935638 Black Oxide Hex Shank Drill Bit, 5/32-Inch - The black oxide hex shank high speed steel drill bits feature a 135° split-point tip for faster starts with no walking they’re manufactured with premium high speed steel with a black and gold oxide coating for major corrosion resistance. The irwin tools 4935638 5/32″ black oxide hex shank drill bit is a 2-piece black oxide drill bit designed to work with todays 1/4-inch quick change chucks and extensions. This bit works in quick change impact drivers and because it has a quick change shank, you can change from drilling to driving quickly to get the job done fast. .

 

Irwin Tools 4935632 Black Oxide Hex Shank Drill Bit, 1/16-Inch - The black oxide hex shank high speed steel drill bits feature a 135° split-point tip for faster starts with no walking they’re manufactured with premium high speed steel with a black and gold oxide coating for major corrosion resistance. The irwin tools 4935632 1/16″ black oxide hex shank drill bit is a 2-piece black oxide drill bit designed to work with todays 1/4-inch quick change chucks and extensions. This bit works in quick change impact drivers and because it has a quick change shank, you can change from drilling to driving quickly to get the job done fast.

 

Irwin Industrial Tools 73138 TurboMax Fractional Metal Index Straight Shank Drill Bit Set, 29-Piece - Turbomax drill bit tip design stays sharp and drills fast. Full lifetime warranty. Drill bits constructed of m-2 high-speed steel for strength, as well as heat and wear resistance. Bit is constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. Revolutionary tip design stays sharper longer and drills up to 28 percent faster than other leading drill bits. 3-flatted shank design provides better chuck grip and reduces slippage. Irwin drill bits are ideal for use in keyless chucks. Three-flatted shank design provides better chuck grip and reduces slippage ideal for use in keyless chucks. Three flatted shank on 3/16-inch and above. This drill bit set comes in a metal index case.

 

Irwin Tools 3016032 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 1/2″ x 6″ - Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Made from industrial grade high-speed steel for increased durability 8% cobalt alloy is heat and abrasion-resistant. Bit has a straight shank.

 

uxcell 6mm Hex Shank Drill Bit Chuck Adapter Converter Power Tool 2pcs - . Quickly convert your quick change hex shank driver into a drillkeyless chuck finger-tightens for easy bit changes. Instantly convert impact driver to hold non-quick change drill and driver bits. Unlimited use in automotives, garages, warehouses, offices,  homes etc.

 

8PC HSS Cobalt Silver & Deming Drill Bits Set, Large Size 9/16″ to 1″, Reduced 1/2″ Shank - Unit can be stacked with other huot dispenser cabinets. Labeled compartments for identification and organization. Five-drawer cabinet holds two each of 1/2″ reduced shank drill bits in fractional sizes from 33/64″ to 63/64″ in 1/64″ increments. Made in usa. 8pc hss cobalt silver & deming drill bits set, large size 9/16″ to 1″, reduced 1/2″ shank.

 

Milwaukee 48-32-1500 Quik-Lok 38-Piece Hex Shank Drilling and Driving Bit Set - Versatile and durable 38-piece quik-lok bit system. Screwdriver bits made from premium quality s2 steel for high torque applications. Soft grip handle design offers increased gripping surface and comfort. All-metal ratcheting keyless chuck for greater bit retention. Delivers high performance in heavy-duty applications. Limited lifetime manufacturer’s warranty. Quik-lok all-hex chuck provides fast and easy accessory changes and fits all 3/8- and 1/2-inch drill chucks. Titanium drill bits for long life and superior performance.

 

Irwin Tools 4935640 Black Oxide Hex Shank Drill Bit, 7/32-Inch - The black oxide hex shank high speed steel drill bits feature a 135-degree split-point tip for faster starts with no -inchwalking. This bit works in quick change impact drivers and because it has a quick change shank, you can change from drilling to driving quickly to get the job done fast. -Inch they’re manufactured with premium high speed steel with a black and gold oxide coating for major corrosion resistance. The irwin tools 4935640 7/32-inch black oxide hex shank drill bit is a 2-piece black oxide drill bit designed to work with todays 1/4-inch quick change chucks and extensions.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.