Mitee Bite 31100 ID XpansionClamp – SCREW SIZE: #6-32 MAXIMUM HOLDING FORCE: 1900 lbs. Thread Length: .50″
- . Easily machined to size on lathes or mills. Featuresclamp body made of mild steel for machinability. Applicationsideal way to hold multiple parts on an inside diameter for machining on your vertical or horizontal machining center. Low profile.
Mitee-Bite MB-5C Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Economical- all six sides of the hex nut can be used. . Available in six sizes for use on multiple part fixtures. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Mb-10203 and mb-50207 are stainless steel. Its small size allows more parts per load on multiple series jobs. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Metric sizes are in millimeters. The low profile makes programming easier because there are no clamps to jump over. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use.
MITEE-BITE T-SLOT CLAMPS – Model : TSN-687 SCREW SIZE: 1/2″-13 MAXIMUM HOLDING FORCE: 4,000 lbs. Thread Length: 1″
- Half turn provides. 100″ movement. Computer programming is easier, and the small size allows more parts per load. If one of the six sides is worn or damaged, just turn to another. .
Mitee Bite 32175 Replacement Versa Grip
- The hardened grip (52-54 rc) has penetrating teeth designed to bite into your workpiece preventing lateral and horizontal movement. Accommodates a wide range of part sizes as well as holding multiple parts in a single cycle. The grips will hold flame cut parts, castings and parts with a negative draft. Grips (2 piece pack).
Mitee-Bite MB-6075 Uniforce Fixture Clamp Mitee-Bite Clamping System, Uniforce Clamp
- Clamping systems, uniforce clamps, compact and economical, uniforce clamps enable you to fixture more parts on the machine table. Ideal for clamping flat or round work pieces. Order one piece and you will receive one package. Minimizes tool changes. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel.
Mitee-Bite MB-50210 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Available in six sizes for use on multiple part fixtures. Metric sizes are in millimeters. Economical- all six sides of the hex nut can be used. Mb-10203 and mb-50207 are stainless steel. Its small size allows more parts per load on multiple series jobs. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. The low profile makes programming easier because there are no clamps to jump over. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts.
Mitee-Bite MB-250 Machinable Uniforce Fixture Clamp 1.125 x .50 x .62 w/#8-32 Mounting Screw, Machinable Uniforce Clamp
- Order one piece and you will receive one complete assembly with mounting screws and locking plate. Clamping systems, machinable uniforce clamps, the compact clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your work piece, enabling you to fixture unusual applications easily. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel. A unique locking plate is provided to make the clamp rigid while machining the jaws to your specifications.
Mitee-Bite MB-2 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Its small size allows more parts per load on multiple series jobs. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Mb-10203 and mb-50207 are stainless steel. Metric sizes are in millimeters. Available in six sizes for use on multiple part fixtures. The low profile makes programming easier because there are no clamps to jump over. Economical- all six sides of the hex nut can be used.
Mitee-Bite MB-5 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Available in six sizes for use on multiple part fixtures. The low profile makes programming easier because there are no clamps to jump over. Economical- all six sides of the hex nut can be used. Metric sizes are in millimeters. Its small size allows more parts per load on multiple series jobs. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Mb-10203 and mb-50207 are stainless steel. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use.
Mitee Bite 14500 LOC-JAW 4th & 5th Axis Machining Vise
- Benefitsthe base is configured with a bushing for precise location and repeatability. A centering disk is provided for mounting directly to an indexer. Applicationsfor 4th & 5th axis machining that requires no material preparation with this new unique design. Of holding force. 0″ (1 meter with optional extension kit #14525), capable of penetrating. 5″ to 4. A single support bolt is used to reinforce the gripper towers for rigidity and increased workholding capacity. The low profile grippers hold only. Featuresthe loc-jaw has a clamping range of 0. The rails and gripper towers are serrated to provide a solid and easily adjustable base. 060″ deep per gripper and produces over 6,000 lbs. 125″ allowing full access to all work surfaces including the bottom face.
Mitee-Bite MB-8 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Available in six sizes for use on multiple part fixtures. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Its small size allows more parts per load on multiple series jobs. Metric sizes are in millimeters. The low profile makes programming easier because there are no clamps to jump over. Mb-10203 and mb-50207 are stainless steel. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Economical- all six sides of the hex nut can be used. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use.
Mitee-Bite Uniforce® Clamps Model 750 6/pk
- . The compact, economical uniforce® clamp enables fixturing more parts on the machine table. The specially designed steel wedge spreads the clamping force uniformly on both sides of the channel.
MITEE BITE 6″ VersaGrip Vise Jaw
- . The grips will hold flame cut parts, castings and parts with a negative draft. The hardened grip (52-54 rc) has penetrating teeth designed to bite into your workpiece preventing lateral and horizontal movement. Features accommodates a wide range of part sizes as well as holding multiple parts in a single cycle.
LED MAGNETIC BASE LOC- LITE – MITEE-BITE
- Adjustable to any position. Waterproof, stainless steel construction. Battery life 100+ hours. 100,000 hour led light. Rubber coated earth magnet.
Mitee Bite 35200 Strap Clamp – Length : 1/2″ – 1-7/8″
- Benefitsguaranteed replacement if permanently distorted on your machine. Heat treated 17-4p. Featuresrigid -150,000 psi ultimate yield. Stainless steel. Safer clamping because the clamp does not bend. H.
Mitee-Bite MB-6100 Uniforce Fixture Clamp Mitee-Bite Clamping System, Uniforce Clamp
- Minimizes tool changes. Clamping systems, uniforce clamps, compact and economical, uniforce clamps enable you to fixture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel. . Ideal for clamping flat or round work pieces. Order one piece and you will receive one package.
Mitee-Bite MB-50208 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Positive down force with very little space. Has a serrated clamping surface for rougher work. Adjustable clamp height. Has both a smooth surface for machined workpieces. Workpieces can be clamped in series by using the backlsurface of a clamp to locate the next workpiece.
Mitee-Bite MB-22588 Knife Edge Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Knife Edge Clamp
- Follows contour of part for maximum contact. Hardened steel bites into workpiece for secure clamping for castings and rough cut stock. Clamping systems, knife edge clamps, low profile, fast cam action.
MITEE-BITE Uniforce Clamps – Model .: 61000 Base Width : .820″ Overall Length : 1.250″ Thread Size: 5/16″-18
- 980″ holding force 2,000 lbs. A compact, economical workholding device enables you to fixture more parts on the machine table. Maximum spread 1. 500″ top width. “F” is the distance to allow between workpieces for clamp clearance. 02″ hex key size 1/4″. 060″ overall height without threaded portion 1. Drill and tap mounting hole on the center of “f”. Expanded width 1. 000″ height of expansion section.
Mitee-Bite MB-6 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- The low profile makes programming easier because there are no clamps to jump over. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Mb-10203 and mb-50207 are stainless steel. Available in six sizes for use on multiple part fixtures. Economical- all six sides of the hex nut can be used. Its small size allows more parts per load on multiple series jobs. Metric sizes are in millimeters. . Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time.
Mitee-Bite MB-4 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Its small size allows more parts per load on multiple series jobs. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Economical- all six sides of the hex nut can be used. Metric sizes are in millimeters. The low profile makes programming easier because there are no clamps to jump over. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Mb-10203 and mb-50207 are stainless steel. Available in six sizes for use on multiple part fixtures.
Mitee-Bite 2 56 Bolt 0.320″ Long 0.240″ Wide 0.270″ Thick Uniforce Clamp
- Positive side gripping action provides greater strength. Mitee-bite 2 56 bolt 0320″ long 0240″ wide 0270″ thick uniforce. Mitee-bite 9/16″ bolt 194″ long 112″ wide 062″ thick t-slot toe.
Mitee-Bite 5/8″ Bolt 1.94″ Long 1.12″ Wide 0.62″ Thick T-Slot Toe Clamp
- Available individually for fixturing with pitbull and dyna-force clamps or soft jaw applications. Ideal for smal lot sizes, difficult applications or proto-type work without building a fixture. Mitee-bite 5/8″ bolt 194″ long 112″ wide 062″ thick t-slot toe.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
