5 3/8″ Plastic Masonry Fastener (200 pcs.)
- 2-3/8″ head sits flush on insulation. Available in multiple lengths. Pre-drill hole with 5/16″ masonry bit. For foam thicknesses 3 1/2″, 4″. For use when attaching rigid continuous insulation to concrete / masonry substrates.
1/4 X 6″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENER -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 7-1/2 MASONRY DRILL BIT
- 1/4 x 6″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -3/16″ x 7-1/2 masonry drill bit.
Universal 801486 Tapcon Masonry Fasteners, Slotted Hex 3/16″ Diameter x 1-3/4″
- Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. . Sold with a drill bit. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point.
Universal 801472 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 2-1/4″
- Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point. Sold with a drill bit.
1/4 X 3-3/4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENER -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT
- 1/4 x 3-3/4″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -3/16″ x 5-1/2 masonry drill bit.
Universal 801480 Tapcon Masonry Fasteners, Slotted Hex, 1/4″ Diameter x 1-1/4″
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point. Sold with a drill bit. . Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor.
2″ Plastic Masonry Fastener (50 pcs.)
- For foam thicknesses of 1/2-1″. Available in multiple lengths. Pre-drill hole through insulation and into concrete/block substrate with 5/16″ masonry bit. For use when attaching rigid continuous insulation to concrete / masonry substrates. 2-3/8″ head sits flush on insulation.
Universal 801477 Tapcon Masonry Fasteners, Flat Phillips Head 3/16″ Diameter x 2-1/4″
- Sold with a drill bit. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point. Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor.
3/16 X 4″ ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – #2 PHILLIPS – BOX QUANTITY 100 -5/32″ X 5-1/2 MASONRY DRILL BIT
- 3/16 x 4″ ultracon phillips flat head carbon steel masonry fasteners for concrete -blue stalgard coating, #2 phillips, box quantity 100 -5/32″ x 5-1/2 masonry drill bit.
Greenlee LE425 .25-Inch by 2.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack
- Each box contains one drill bit. Simple two-step operation, drill, then drive, eliminates the need to set anchors. All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Fasteners can be removed and reinserted in the same hole. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength.
1/4 X 4″ ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENER -BLUE STALGARD COATING – #2 PHILLIPS – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT
- 1/4 x 4″ ultracon phillips flat head carbon steel masonry fasteners for concrete -blue stalgard coating, #2 phillips, box quantity 100 -3/16″ x 5-1/2 masonry drill bit.
3/16 X 4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -5/32″ X 5-1/2 MASONRY DRILL BIT
- 3/16 x 4″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -5/32″ x 5-1/2 masonry drill bit.
Hillman Hex Tapper Masonry Fasteners 1/4 ” X 2-3/4 ” Hex Head Slotted 100/Box
- All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Fasteners can be removed and reinserted in the same hole. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength. Simple two-step operation, drill, then drive, eliminates the need to set anchors. Each box contains one drill bit.
2 3/4″ Plastic Masonry Fastener (250 pcs.)
- 2-3/8″ head sits flush on insulation. Available in multiple lengths. Pre-drill hole with 5/16″ masonry bit. For use when attaching rigid continuous insulation to concrete / masonry substrates. For foam thicknesses 1″, 1 1/2″.
1/4 X 5″ ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – #2 PHILLIPS – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT
- 1/4 x 5″ ultracon phillips flat head carbon steel masonry fasteners for concrete -blue stalgard coating, #2 phillips, box quantity 100 -3/16″ x 5-1/2 masonry drill bit.
Hodell-Natco PFCS0250400CP Phillips Flat Head Masonry Fasteners 1/4″ X 4″ 100 Per Pack
- Grade 2. Size 1/4″ x 4″. Zinc plated steel. Item diameter 1/4″.
3/16 X 3-3/4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -5/32″ X 3-1/2 MASONRY DRILL BIT
- 3/16 x 3-3/4″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -5/32″ x 3-1/2 masonry drill bit.
818142 PHILLIPS FLAT HEAD MASONRY FASTENERS 1/4″” X 1 1/4″”
- Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. Zinc plated steel grade 2. Sold with a drill bit.
HODELL-NATCO INDUSTRIES HXCS0250225CP SLOTTED HEX HEAD MASONRY FASTENERS 1/4 IN. X 2-1/4 IN., 100 PER PACK (1/PK)
- Boxed/100. 1/4 x 3-3/4. Hillman tapper masonry fastener. Use with tapper 1000 installation tool and an tapper bit. Phillips flat head.
Greenlee LE435 .1875-Inch by 1.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack
- All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Simple two-step operation, drill, then drive, eliminates the need to set anchors. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength. Fasteners can be removed and reinserted in the same hole. Each box contains one drill bit.
Universal 818140 Phillips Flat Head Masonry Fasteners, 3/16″ x 3-1/4″ (Pack of 100)
- . Grade 2. Zinc plated steel. With this product you will be able to solve all of your problems and at the best available quality.
2″ Plastic Masonry Fastener (250 pcs.)
- For foam thicknesses 1/2″, 1″. 2-3/8″ head sits flush on insulation. Pre-drill hole with 5/16″ masonry bit. For use when attaching rigid continuous insulation to concrete / masonry substrates. Available in multiple lengths.
Hillman Tapper Masonry Fastener 1/4 ” X 3-3/4 ” Flat Head Phillips Blue 100/Box
- Use with tapper 1000 installation tool and an tapper bit. Hillman tapper masonry fastener. Boxed/100. Phillips flat head. 1/4 x 3-3/4.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
