Top 23 for Best Southeast Tool

 

Southeast Tool SLAT730 Carbide Tipped Latch Bore Bit – 6″ OAL x 15/16″ D x 1/2″ Shank, w/ Flat - 6-1/4″ length. Norfield latch boring bits. 5/16″ 1 flat. Carbide-tipped.

 

Southeast Tool SDK510 Carbide-Tipped Door Knob 3 Wing Drill Bit – 2-1/8″D, 5-3/4″OAL, 1/2″Shk, Flat - This bit features carbide at a 30 angle, the result is clean cuts, while shavings peel away. Works on ruvo machinery great for masonite. 5-3/4″ overall length. 2-1/8″ plug-less bit, flat on shank.

 

Southeast Tool SDR310 3-Wing Bit – 7/8″ D x 6″ OAL x 1/2″ Shank - Overall length, 6″ twist length, 1″. Also excellent for lock hole boring in wood doors. Bore plastic formica and tempered masonite as well as abrasive materials and hard wood. Size, 7/8″ shank, 1/2″.

 

Southeast Tool 129330 Carbide Tipped Latch Boring Bit – 7/8″ Diameter with 1 Flat Shank, 6-1/4″ OAL - 6-1/4″ length. 7/8″ 1 flat. Carbide-tipped.

 

Southeast Tool SDK500 Carbide-Tipped Door Knob 3 Wing Drill Bit – 2-1/8″D, 5-3/4″OAL, 1/2″Shk - It makes a clearly superior tool at a greatly reduced cost. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. No flatbraze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. )Carbide brazing is done with a high silver braze alloy. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. (There are other definitions but they are all pretty close to this. Door knob 3 wing drill, (drill press,boring and milling machine use only, carbide tipped, southeast tool sdk500 2 1/8 cutting diameter, 1/2 shank, 5 3/4 overall length. This makes it expensive but it is really worth it.

 

Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL - 5-3/4″ overall length. Works with most pre-hung door equipment. Carbide tipped for long life, these bits are recommended for wood doors. All bits have 1/2″ shank.

 

Southeast Tool SBT1T Carbide-Tip Brad Point Twist Bit – 1″D, 4″Lgt, 5-13/16″OAL, 7/16-14″ Shk/Thread - 5-15/16″ overall length. 1″, threaded flats 1/2″ shank. No 200 ct for latch bore. Recommended for drive-in bolts.

 

Southeast Tool SLAT790 Carbide Tipped Latch Bore Bit – 5-7/8″ OAL x 1″ D x 7/16″ Shank, Threaded - Carbide-tipped. 1″, threaded shank. 5-7/8″ length. Norfield latch boring bits.

 

Southeast Tool SBPT1T-L-18L Drill Bit – 1/2″ Diameter x 18″ Long - For masterline extension flush bolt drill fixture. 18″ replacement drill bit.

 

Southeast Tool SBPT1F Carbide-Tip Brad Point Twist Bit – 1″D x 4″Twist x 6″OAL, 1/2″ Shank w/ 3 Flat - 5-15/16″ overall length. No 200 ct for latch bore. Recommended for drive-in bolts. 1″, three flats 1/2″ shank.

 

Southeast Tool SEHMA-3/8-XL Arbors For Screw-On Mortise Bits – 3/8″ D x 2-5/8″ OAL, 1/4-28 Thread - Thread size, 1/4-28. Arbor, 3/8″.

 

Southeast Tool SE29007 General Purpose Drill Bits – 7/64″D, 2-5/8″OAL, 1-1/2″Flute, 1-1/8″Shank, RH - Diameter, 7/64″ decimal equivalent, 1094″. No x10 general purpose jobbers length straight shank twist drills. Overall length, 2-5/8″ twist length, 1-1/2″. High speed steel, much longer life than carbon steel 118 point.

 

Southeast Tool 129333 Carbide Tipped Lock Boring Bit – 1-5/8″ D w/ 1 Flat Shank, 5-3/4″ OAL - Carbide tipped for long life, these bits are recommended for wood doors. All bits have 1/2″ shank. Works with most pre-hung door equipment. 5-3/4″ overall length.

 

Southeast Tool SLAT780 Carbide Tipped Latch Bore Bit – 6″ OAL x 1″ D x 1/2″ Shank, w/ Flat - Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. )Carbide brazing is done with a high silver braze alloy. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. (There are other definitions but they are all pretty close to this. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. This makes it expensive but it is really worth it. With flatbraze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. Door latch drill bits, for automated pre-hung door equipment, carbide tipped, southeast tool slat780 1 cutting diameter, 1/2 shank, 6 overall length. It makes a clearly superior tool at a greatly reduced cost. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear.

 

Southeast Tool SE29008 General Purpose Drill Bits – 1/8″D, 2-3/4″OAL, 1-5/8″Flute, 1-1/8″Shank, RH - No x10 general purpose jobbers length straight shank twist drills. Diameter, 1/8″ diameter, 1/8″. High speed steel, much longer life than carbon steel 118 point. Overall length, 2-3/4″ twist length, 1-5/8″.

 

Southeast Tool SLAT740 Carbide Tipped Latch Bit – 15/16″D x 5-7/8″OAL x 1/2″ Threaded Shank - 5-7/8″ length. Norfield latch boring bits. Carbide-tipped. 5/16″, threaded shank.

 

Southeast Tool SDR410 3-Wing Bit – 2-1/8″ D x 6″ OAL x 1/2″ Shank - No 812-ct carbide-tipped 3-wing drill. Precision ground and hand inspected only the very best materials and grinding techniques used. The most accurate er32 collet in the industry- average 00002″ total indicated runout (tir). Clamping range 398-437″.

 

Southeast Tool SBPT1T-L-48L Brad Point Drill Bit w/ 18″ Auger Bit – 1/2″ D x 48″ L - 48″ brad point drill. Mounts in a 1/2″ drill motor. Cutting length 6″. This extra-long drill bit can be used for door preparations where an extended length is required.

 

Southeast Tool SLOC605 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL, 3 Flat on Shank - Works with most pre-hung door equipment. 5-3/4″ overall length. All bits have 1/2″ shank. Carbide tipped for long life, these bits are recommended for wood doors.

 

Southeast Tool SE29009 General Purpose Drill Bits – 9/64″D, 2-7/8″OAL, 1-3/4″Flute, 1-1/8″Shank, RH - Overall length, 2-7/8″ twist length, 1-3/4″. No x10 general purpose jobbers length straight shank twist drills. Diameter, 9/64″ decimal equivalent, 1406″. High speed steel, much longer life than carbon steel 118 point.

 

Southeast Tool SDR305 3-Wing Bit – 5/8″ D x 6″ OAL x 1/2″ Shank - Overall length, 6″ twist length, 1″. Bore plastic formica and tempered masonite as well as abrasive materials and hard wood. Also excellent for lock hole boring in wood doors. Size, 5/8″ shank, 1/2″.

 

Southeast Tool 129326 Carbide Tipped Latch Bit – 15/16″D x 1/2″ Shank x 6-1/4″OAL w/Round Shank - Carbide-tipped. Norfield latch boring bits. 6-1/4″ length. 5/16″.

 

Southeast Tool SE29012 General Purpose Drill Bits – 3/16″D, 3-1/2″OAL, 2-5/16″Flute, 1-3/16″Shnk, RH - Overall length, 3-1/2″ twist length, 2-5/16″. Diameter, 3/16″ decimal equivalent, 1875″. No x10 general purpose jobbers length straight shank twist drills. High speed steel, much longer life than carbon steel 118 point.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.