Top 23 Miter Router Bits

 

SKIL 91703 Lock Miter Router Bit - Controlled depth of cut minimizes kickback. Overall length 15/16-inch. Manufactured and designed to the highest quality standards. Diameter size 1-3/4-inch. Cutter length 13/16-inch.

 

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2 Shank (7/8 Height) by Freud - Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Freud 99-035 45-degree lock miter router bit with 1/2 shank (7/8 height). Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced.

 

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 3/4-Inch Stock 1/2-Inch Shank by Yonico - Used for wood perforation,spherical door tip installation,drawer tip,plastic products,wood,plywood,etctrepanning more smooth,less noise. Hardened and tempered,carbon steel construction. Selection of high quality alloy blade,make blade more sharp and durable,it’s head adopt arc curve design,beneficial to chip removal, perforation is more efficient. Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Yonico 15127 medium lock miter router bit with 45-degree 3/4-inch stock 1/2-inch shank.

 

Special Offer 45° – 1/4″ Shank – 3/4″ Stock Carbon Steel Alloy Medium Lock Miter Router Bit - Shk = shank size ld = diameter cl = cutting length. I m p o r t a n t select size above based on legend below. 100% satisfaction guaranteed.

 

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2″ Shank (7/8″ Height) - Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Freud’s philosophy is woodworkers should expect safety, not pay for it. Overall diameter 2-11/64-inch, shank diameter 1/2-inch. Freud’s precision ground carbide bits have a grain size smaller than other grades and titanium is added making them impervious to chemical attack.

 

XNEMON Small Lock Miter Router Bit 45¡ã 1/2″ Stock 1/2″ Shank Tenon Cutter Floor Handmade Milling Cutter for Woodworking - High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. C3 micro-grain tungsten carbide cutters. Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. Solid hardened steel bodies with anti-kickback design. Build-up & heat resistant teflon coating.

 

Infinity Tools 55-503, 1/2″ Shank Lock Miter Router Bit - Precision machined from fatigue-proof steel for extra strength. Use with stock from 5/8″ to 1-1/8″ thick. 2-3/4″ cutter diameter x 1-3/16″ cutter height. Micro-grain carbide tips for a long life and repeated sharpening. Silver ptfe coating reduces resin build-up for fast and easy cleaning.

 

Yonico 15220 22.5-Degree Lock Miter Glue Joint Router Bit Set 1/2-Inch Shank - Set comes in a solid wood storage case. Put a 45 degree joint in place of a 90 degree angle to soften a sharp look. 5 degree miters to make 45 degree joints. This set will cut 22. Then, you can cover the new surface with a column for added beauty. Two flute carbide cutters & 1/2″ shanks. Great for 8 sided projects such as planters.

 

22.5 Degree Lock Miter Router Bits – SHK 1/2 | LD 1-15/32 | CL 15/16 - Legend below explains sizing. Our carbide-tipped 22. Industrial quality cutting bits manufactured in the usa by southeast tool. Select your item(s) then click add to cart. Legend below explains sizing. 5 degree lock miter router bits are great for drawer or box glue joints and will add strength to any project. Note this bit is to be used in a router table application and not in a hand-held router. Select your item(s) then click add to cart.

 

Amana Tool 55390 45-Degree Lock Miter 2-11/16-Inch Diameter by 1/2-Inch Shank Router Bit - Full color instructions included learn step-by-step with master craftsman lonnie bird. Carbide tipped, industrial quality. 2-11/16 diameter, 1-3/16-inch cutting height, 45 degree radius, 1/2-inch shank. Max rpm = 18,000. For 1/2, 1-1/8-inch material.

 

SKIL 91703 Lock Miter Router Bit by Skil - Diameter size 1-3/4-inchcutter length 13/16-inchoverall length 15/16-inchmanufactured and designed to the highest quality standardscontrolled depth of cut minimizes kickback.

 

Yonico 15127q Medium Lock 45 Degree Miter Router Bit with 3/4″ Stock and 1/4″ Shank - Simply set the center of the stock to the center of the bit. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. Two flute carbide cutters & 1/4″ shank. Use the reversible 45° lock miter glue joint router bit to join boards at 90°. Then, cut one piece horizontally and the second one vertically. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Ideal for use with 3/4″ stock.

 

Bosch 84508M 3-1/8-Inch Diameter 1-3/8-Inch Cut Carbide Tipped Lock Miter Router Bit 1/2-Inch Shank - This joint not only increases mechanical strength, but also increases glue surface area and automatically aligns parts. Lock miter bit allows materials to join at 90° by cutting a 45° miter and perfect matching tongue and groove glue joint. Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. The fully hardened and tempered steel shank provides ultimate durability.

 

Freud 99-043 Lock Miter Router Bit 22-1/2° 1/2 Shank With TiCo Hi-Density Carbide Style: Lock Miter Router Bit 22-1/2° 1/2 Shank With TiCo Hi-Density Carbide Model: 99-043 - Features freud’s tico hi-density carbide with titanium for long life and a flawless finish. Use on cnc and other automatic routers, as well as table-mounted portable routers. Perma-shield coating to resist heat. Cuts all composition material, plywood, hardwoods, and softwoods. Shear angle design produces superior finish.

 

45° Lock Miter Router Bit -1/2 in Shank - There is also more gluing area, so the joint is stronger than a straight miter. Machining parts with the lock miter bit is easy—with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. Tight miter joints are a hallmark of fine woodworking, and this bit will cut them in spades. To make setting the cutter height easy and fool-proof, use the rockler router bit set-up jig (53817, sold separately) to center the bit on your stock. Once cut, the miters interlock mechanically, and clamping is easy since the parts can’t slide around.

 

PORTER-CABLE 43503 45-Degree Lock Miter Router Bit, 1/2-Inch Shank, Carbide-Tipped - Carbide tipped. 1/2 inch shank.

 

Amana Tool 55389 Carbide Tipped Lock Miter 45 Deg x 1-3/4 D x 7/8 CH x 1/2 Inch SHK Router Bit for 3/8 – 3/4 Material - Carbide tipped. 1/2 inch shank.

 

Task Tools T24341 45-Degree Lock Miter Router Bit with 1/2-Inch Shank and 2-Inch by 7/8-Inch Carbide Height - 45-degree lock miter router bit with 1/2-inch heat-treated, hardened steel shank double flute for quick cuts. Premium quality super fine grain tungsten carbide for an exceptionally smooth finish. Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion. Dynamically balanced up to 24,000 rpm to reduce vibration and kickback. Size 2-inch diameter by 7/8-inch carbide height.

 

Bosch 84508M 3-1/8-Inch Diameter 1-3/8-Inch Cut Carbide Tipped Lock Miter Router Bit 1/2-Inch Shank by Bosch - Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.

 

90 Degree Lock Miter Router Bit Set – SHK 1/2 | 2 Piece - Shk = shank size. 100% satisfaction guaranteed.

 

22-/2 Degree Locking Miter Router Bit Set – 2PC Set - Carbide cutters with non-stick coating to reduce pitch and build-up. Use to make 8 sided boxes without having to calculate the angle. Perfect for making pedestals and more will work with stock up to 3/4 in thickness. The shanks on this set are 1/2″ the set comes in a wooden storage box. Cnc milling technology producing a balanced, smooth cutting bit.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.