Top 24 for Best Shank 1

 

Drill America MMO14-4FSE-XLONG Solid Carbide Extra Long End Mill Polished Finish 4 Flute Square End 1-12 Cutting Length 14 Cutting Diameter 4 Length 14 Shank Pack of 1

Drill America MMO1/4-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 1/4″ Cutting Diameter, 4″ Length, 1/4″ Shank (Pack of 1)

Drill America MMO1/4-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 1/4″ Cutting Diameter, 4″ Length, 1/4″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Available in polished finish. 4 flute single end.

 

Kodiak Cutting Tools KODIAK137520 USA Made Solid Carbide End Mill Coated 2 Flute 18 Shank 1 Length of Cut 3 Overall Length 18 Diameter

Kodiak Cutting Tools KODIAK137520 USA Made Solid Carbide End Mill, Coated, 2 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter

Kodiak Cutting Tools KODIAK137520 USA Made Solid Carbide End Mill, Coated, 2 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter - 1/8 inch diameter solid carbide end mill, coated 1/8″ shank 1″ length of cut 3″ overall length 2 flute carbide, coated. .

 

Drill America DWCF Series High-Speed Steel End Mill Polished Finish 4 Flute Square End 1-38 Cutting Length 58 Cutting Diameter 3-38 Length 12 Shank Pack of 1

Drill America DWCF Series High-Speed Steel End Mill, Polished Finish, 4 Flute, Square End, 1-3/8″ Cutting Length, 5/8″ Cutting Diameter, 3-3/8″ Length, 1/2″ Shank (Pack of 1)

Drill America DWCF Series High-Speed Steel End Mill, Polished Finish, 4 Flute, Square End, 1-3/8″ Cutting Length, 5/8″ Cutting Diameter, 3-3/8″ Length, 1/2″ Shank (Pack of 1) - Available in polished finish. Designed to machine most materials of medium hardness such as steel, brass, bronze and iron. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.

 

Kempston 316021 Full Bead Bit 14-Inch Shank 1-Inch Cutting Diameter by 12-Inch cutting Length 316-Inch Radius

Kempston 316021 Full Bead Bit, 1/4-Inch Shank, 1-Inch Cutting Diameter by 1/2-Inch cutting Length 3/16-Inch Radius

Kempston 316021 Full Bead Bit, 1/4-Inch Shank, 1-Inch Cutting Diameter by 1/2-Inch cutting Length 3/16-Inch Radius - C3 or c4 premium carbide. Anti-kickback design. Cnc precision ground. Prefessional grade. Non-stick coating.

 

Klein Tools P18 Profilated 1 Phillips-Tip Screwdriver-8-Inch Round-Shank1 Tip8-Inch

Klein Tools P18 Profilated #1 Phillips-Tip Screwdriver-8-Inch Round-Shank,#1 Tip/8-Inch

Klein Tools P18 Profilated #1 Phillips-Tip Screwdriver-8-Inch Round-Shank,#1 Tip/8-Inch - -Profilated tip for a more consistent geometric symmetry. -Shank type round. -Shank material chrome vanadium steel. -Accurate fit and more torque without slippage. Len. = overall length len. -Handle material plastic. = Overall length model code  model description aatip size symbol (nom)#1, shank length8 in, overall length11 1/2 in abtip size symbol (nom)#2, shank diam1/4 in, shank length20 in, overall length24 1/2 in actip size symbol (nom)#2, shank length12 in, overall length15 5/8 in adtip size symbol (nom)#2, shank length8 in, overall length11 5/8 in. -Tip finish black. -Length group extra long. Testing and approvals -meets or exceeds applicable ansi and mil specifications. -Shank finish nickel-chrome plated. -Oversized comfordome handle. -Tip type phillips. P18 model code aa, price is for 1 each (part# p18) this item features -heat-treated and tempered shank.

 

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 18 3175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate - Sharp cutting edge produces an excellent surface finish and great work efficiency. Produced from a premium ultra fine solid carbide for maximum tool strength and durability. Mainly for cutting aluminum substrate, full copper foil and other high ductility metal plates and it can also be used for pbga/boc/csp and intergrated circuit substrate molding. 2 flutes with large spiral chip groove bring better chip evacuation, preventing from sticking chips. Less heat build up 2 flutes also allow for faster feed and speed rates.

 

Drill America MMO316-4FSE-XLONG Solid Carbide Extra Long End Mill Polished Finish 4 Flute Square End 1-18 Cutting Length 316 Cutting Diameter 3 Length 316 Shank Pack of 1

Drill America MMO3/16-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/8″ Cutting Length, 3/16″ Cutting Diameter, 3″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/8″ Cutting Length, 3/16″ Cutting Diameter, 3″ Length, 3/16″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish.

 

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 14 Shank 1 Radius Cutter 34 Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/4″ Shank 1″ Radius Cutter 3/4″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit

EnPoint Woodworking Solid Carbide Top Ball Bearing Beading Router Bit 1/4″ Shank 1″ Radius Cutter 3/4″ Cut Height Industrial Quality Rounding Over Fillet Ball Bearing Guide Edging Router Bit - Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit the width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate. This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface.

 

Forney 72738 Wire End Brush Fine Crimped with 14-Inch Hex Shank 1-Inch-by-008-Inch

Forney 72738 Wire End Brush, Fine Crimped with 1/4-Inch Hex Shank, 1-Inch-by-.008-Inch

Forney 72738 Wire End Brush, Fine Crimped with 1/4-Inch Hex Shank, 1-Inch-by-.008-Inch - Crimped style for light to medium duty applications. Manufactured in china. Crimped wire end brush, fine, 1/4hex shank,. Adds extra shine to your product. Works with any power drill or pneumatic air drill. Designed for easy access into narrow holes and confined areas. 1/4-inch (635-mm) hex shank. Removes rust, scale and paint in hard to reach areas.

 

Drill America MMO116-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 14 Cutting Length 116 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - 4 flute single end ball. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish.

 

Drill America MMO132-2FSE Solid Carbide End Mill Polished Finish 2 Flute Square End 18 Cutting Length 132 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/32-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/32-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 2 flute single end. Available in polished finish.

 

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill 4 Flute 38 Shank 1 Length of Cut 2-12 Overall Length 38 Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter - 000″/-. 002″shank diameter tolerance -. 0001″/-. 0004″. 3/8 inch diameter ball nose solid carbide end mill, single end 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, single end diameter tolerance +.

 

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill AlTiN Coated 4 Flute 38 Diameter 38 Shank 1 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length - 3/8 inch diameter solid carbide end mill, altin coated 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, coated. .

 

CMT 85250211 Dado Planer Bit 12-Inch Shank 1-Inch Diameter

CMT 852.502.11 Dado & Planer Bit, 1/2-Inch Shank, 1-Inch Diameter

CMT 852.502.11 Dado & Planer Bit, 1/2-Inch Shank, 1-Inch Diameter - 2 hi-density carbide-tipped cutting edges for long-lasting performance on wood. 3/8-inch cutting length, 2-1/4-inch overall length. Great for mortising in in both natural wood and wood composites. Constructed with thick carbide tips and downward shear angle design for flawless performance. No splintered edges or rough bottoms, fits the most popular mortising jigs.

 

Drill America MMO12-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - 2 flute single end ball. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 12 Shank 1 Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 1″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 1″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit - Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish.

 

Short Shank 1 Drive Air Impact Wrench 1900lb Iw0102 Hoteche

Short Shank 1″ Drive Air Impact Wrench 1900lb Iw0102 Hoteche

Short Shank 1″ Drive Air Impact Wrench 1900lb Iw0102 Hoteche - Pc 1 drive impact sockets 1-1/2″ and 1-5/8″ may vary ideal for”. Capacity 1-1/2 air pressure 90 to 115 psi air inlet 1/2“ 2″. Short shank 1 drive air impact wrench 1900lb 1900 ft/lb pneumatic”. High volume repair works on trucks tires and heavy duty equipment. Tools specifications drive 1“ free speed 4000 rpm bolt size.

 

Grizzly C1207 90-Degree V-Groove Bit 14-Inch Shank 1-Inch Cutter Diameter

Grizzly C1207 90-Degree V-Groove Bit, 1/4-Inch Shank, 1-Inch Cutter Diameter

Grizzly C1207 90-Degree V-Groove Bit, 1/4-Inch Shank, 1-Inch Cutter Diameter - Used in paneling and general profiling in solid wood, composites and vinyl covered material. Large selection for grooving in various widths and depths. .

 

Amana Tool 51200 Panel Pilot Flush 14-Inch Diameter x 14-Inch Cutting Height x 14-Inch Shank 1-Flute Solid Carbide Router Bit

Amana Tool 51200 Panel Pilot Flush 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit

Amana Tool 51200 Panel Pilot Flush 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit - Suitable for routers and trimmers. Amana 51200 specifications diameter 1/4″ carbide height 1/4″ shank 1/4″ length 1-1/2″ type of cut flushamana 51200 features here’s the ideal laminate trimming router bit for high volume production. Solid carbide and integral pilot (no bearing to maintain) extend life of router bit, slim configuration reduces vibration.

 

Kodiak Cutting Tools KCT138334 USA Made  Solid Carbide End Mill Extra Long 4 Flute 18 Shank 1 Length of Cut 3 Overall Length 18 Diameter

Kodiak Cutting Tools KCT138334 USA Made Solid Carbide End Mill, Extra Long, 4 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter

Kodiak Cutting Tools KCT138334 USA Made Solid Carbide End Mill, Extra Long, 4 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter - 1/8 inch diameter solid carbide end mill, extra long 1/8″ shank 1″ length of cut 3″ overall length 4 flute carbide, extra long. .

 

Freud 04-124 38 Diameter by 1 Double Flute Straight Router Bit with 14 Shank

Freud 04-124 3/8″ Diameter by 1″ Double Flute Straight Router Bit with 1/4″ Shank

Freud 04-124 3/8″ Diameter by 1″ Double Flute Straight Router Bit with 1/4″ Shank - Covered by freud’s limited lifetime warranty. Kickback reducing design. Precision ground for the smoothest cuts. Individually computer balanced.

 

Freud Adjustable Tongue Groove Router Bit Set with 1-34 Diameter ½ Shank 99-036

Freud Adjustable Tongue & Groove Router Bit Set with 1-3/4″ Diameter, ½” Shank (99-036)

Freud Adjustable Tongue & Groove Router Bit Set with 1-3/4″ Diameter, ½” Shank (99-036) - Adjustable at 002 inch increments for stock thickness of ½” to 1-1/4″ and groove widths of 7/32″ to 3/8″. Use on table-mounted portable routers. Produces perfectly fitting tongue and groove joints for projects such as cabinet doors. Exclusive freud tongue cutter with opposing shear angles deliver a flawless finish. Cuts all composition materials, plywoods, hardwoods, and softwoods.

 

CMT 83899211 Roundover Bit 12-Inch Shank 1-Inch Radius Carbide-Tipped

CMT 838.992.11 Roundover Bit, 1/2-Inch Shank, 1-Inch Radius, Carbide-Tipped

CMT 838.992.11 Roundover Bit, 1/2-Inch Shank, 1-Inch Radius, Carbide-Tipped - Produces a particular rounded profile, ending up with an elegant bead on the top. To be used on router tables only for simple tasks like easing sharp corners. Also for more intricate jobs like making drop leaf tables, when paired up with a cmt cove bit. 2-1/2-inch diameter, 1-5/16-inch cutting length, 3-13/64-inch overall length. Anti-kickback design, non-stick orange shield coating, equipped with a bearing.

 

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 532 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 5/32″ 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 5/32″ 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel - Ballnose for producing round bottomed grooves in hardwood and softwood, plywood & composites. With tialn coating increases cutting speed and tool life as well as improving the surface finish. 2 flutes allows higher feedrates and provides great chip clearance to prevent chips from sticking. Produced from ultra-fine submicron nano grade solid carbide for maximum tool strength and durablity. Used to add a radius between perpendicular faces to reduce stress concentrations.