Top 25 Best Inlay Router Bits

 

Bosch 85654M 18-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank by BOSCH

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH - Be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing tableall bits must be inserted in the full length of the collet.

 

Freud 85-025 12-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Style 85-025 12-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Model 85-025

Freud 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-025

Freud 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-025 - These inlay bits are for the craftsman who wants to do decorative inlay work in solid surface counter tops. Covered by freud’s limited lifetime warranty.

 

Freud 85-019 14-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank

Freud 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank

Freud 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank - Individually computer balanced. Covered by freud’s limited lifetime warranty. Precision ground for the smoothest cuts. Kickback reducing design.

 

Bosch 85657M 18-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85657M 1/8-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85657M 1/8-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Freud 85-023 12-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Style 85-023 12-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Model 85-023

Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023

Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023 - Ideal for decorative inlay work in solid surface countertops. Application cuts all solid surface materials, hardwood and other composite materials. . Use on hand-held portable routers.

 

Bosch 85655M 316-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85655M 3/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85655M 3/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

StewMac Carbide Downcut Inlay Router Bits Set of 5 diameter sizes

StewMac Carbide Downcut Inlay Router Bits, Set of 5 diameter sizes

StewMac Carbide Downcut Inlay Router Bits, Set of 5 diameter sizes - Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Set includes bits in the following cutting widths 1/32″, 3/64″, 1/16″, 3/32″ and 1/8″. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Each bit in this set of 5 comes in its own sturdy protective case, with bit cutting diamater size clearly marked. Solid carbide lasts far longer than steel.

 

Bosch 85652M 316-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank by BOSCH

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH - Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85651M 18-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85651M 1/8-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85651M 1/8-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Magnate 1171 Side Face-Inlay Router Bits - 18 Cutting Height 5 Shank Length

Magnate 1171 Side Face-Inlay Router Bits – 1/8″ Cutting Height; 5″ Shank Length

Magnate 1171 Side Face-Inlay Router Bits – 1/8″ Cutting Height; 5″ Shank Length - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. The cutting depth of all bits is 1/8″. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Brass on either spindle stock up to 8″ in diameter, or flat stock up to 4″ wide that has a curved profile i. Used for inlaying wood veneer, and other materials i. By replacing the original bearing, br-05, the rabbet depth varies as follows original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ shank length is measured from middle of the knife to the end of the shank. Bow front drawer. E. Excessive overall length may cause tool damage. E. Designed for the legacy ornamental mill.

 

Freud 85-027 34-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Style 85-027 34-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Model 85-027

Freud 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-027

Freud 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-027 - Application cuts all solid surface materials, hardwood and other composite materials. . Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers.

 

Magnate 1157 Face-Inlay Router Bits - 12 Cutting Height 3-12 Overall Length

Magnate 1157 Face-Inlay Router Bits – 1/2″ Cutting Height; 3-1/2″ Overall Length

Magnate 1157 Face-Inlay Router Bits – 1/2″ Cutting Height; 3-1/2″ Overall Length - The cutting depth of all bits is 1/8″. Used for inlaying wood veneer, and other material i. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Brass. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. E. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. In case a bit doesn’t come with a speed chart.

 

Magnate 1153 Face-Inlay Router Bits - 14 Cutting Height 3 Overall Length 12 Shank Diameter

Magnate 1153 Face-Inlay Router Bits – 1/4″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter

Magnate 1153 Face-Inlay Router Bits – 1/4″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting depth of all bits is 1/8″. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. E. Used for inlaying wood veneer, and other material i. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Brass.

 

Magnate 1173 Side Face-Inlay Router Bits - 14 Cutting Height 5 Shank Length

Magnate 1173 Side Face-Inlay Router Bits – 1/4″ Cutting Height; 5″ Shank Length

Magnate 1173 Side Face-Inlay Router Bits – 1/4″ Cutting Height; 5″ Shank Length - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. Designed for the legacy ornamental mill. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Brass on either spindle stock up to 8″ in diameter, or flat stock up to 4″ wide that has a curved profile i. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. E. Used for inlaying wood veneer, and other materials i. By replacing the original bearing, br-05, the rabbet depth varies as follows original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ shank length is measured from middle of the knife to the end of the shank. It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. E. Bow front drawer. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting depth of all bits is 1/8″. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.

 

Freud 85-015 14-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Style 85-015 14-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Model 85-015

Freud 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-015

Freud 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-015 - Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. Ideal for decorative inlay work in solid surface countertops.

 

Bosch 85658M 316-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Bosch 85654M 18-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85653M 116-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85653M 1/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85653M 1/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85658M 316-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank by Bosch

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by Bosch

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by Bosch - Be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing tableall bits must be inserted in the full length of the collet.

 

Bosch 85652M 316-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Bosch 85650M 116-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85650M 1/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85650M 1/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Magnate 1151 Face-Inlay Router Bits - 18 Cutting Height 3 Overall Length 12 Shank Diameter

Magnate 1151 Face-Inlay Router Bits – 1/8″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter

Magnate 1151 Face-Inlay Router Bits – 1/8″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Excessive overall length may cause tool damage. Used for inlaying wood veneer, and other material i. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting depth of all bits is 1/8″. E. You may try the following suggestion. Brass.

 

StewMac Carbide Downcut Inlay Router Bit 364 119mm diameter

StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter

StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter - For fine detail inlay routing. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Solid carbide lasts far longer than steel.

 

MLCS 9177 Brass Router Inlay Kit with Router Bit

MLCS 9177 Brass Router Inlay Kit with Router Bit

MLCS 9177 Brass Router Inlay Kit with Router Bit - This solid brass inlay kit will fit your porter cable®, black & decker or any router with a manufacturer supplied adaptor for porter cable® bushings. Note bowtie inlay pattern is not included. A 1/8″ downcut solid carbide spiral bit (1/8″ shank with 1/4″ adaptor bushing) is also included. Kit includes a brass bushing, brass template guide and brass retainer nut. This easy to use inlay kit follows a 3/16″ thick pattern template of almost any shape to produce the recess. . Create precisely matched inlays by simply removing the bushing.

 

Magnate 1155 Face-Inlay Router Bits - 38 Cutting Height 3 Overall Length 12 Shank Diameter

Magnate 1155 Face-Inlay Router Bits – 3/8″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter

Magnate 1155 Face-Inlay Router Bits – 3/8″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter - It is also equipped with wide open gullets for easy disposal of wood chips. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. In case a bit doesn’t come with a speed chart. Used for inlaying wood veneer, and other material i. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. E. Brass. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting depth of all bits is 1/8″. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.