11 Sep 2018
Top 17 Best Flute Drill Bits
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 1/16″ Size, 1-5/8″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, cast iron and steel. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Round shanks allow use with a wide variety of toolholding systems.
Precision Twist R10 High Speed Steel Jobber Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 3/16″ (Pack of 12) - High-speed steel (hss), for use on a wide variety of materials. Round shanks, for use on a variety of tool-holding systems. 118-degree conventional point angles, for general drilling applications. Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking. Jobber-length, for a wide range of applications.
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 5/32″ Size, 2-1/16″ Length (Pack of 1) - Applicable for non-ferrous material, cast iron and steel. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications.
5Pcs Industrial Split Point Cobalt UNI Step Spiral Flute Drill Bit Set - 7/16″, 1/2″) 1/8″ to 1/2″ 13 steps (1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″) 3/8″ shank 1/4″ to 3/4″ 9 steps (1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″) 1/4″ to 1-3/8″ 10 steps (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″)v 3/16″ to 7/8″ 12 steps (3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″). Features cobalt steel bits provide longer life and cut faster than high speed steel two spiral flutes, automatically deburrs as you drill and provides better chip removal tri-flat shank for sure grip 135 degree split point, self centering case included set contains 1/4″ shank 3/16″ to 1/2″ 6 steps (3/16″, 1/4″, 5/16″, 3/8″.
Precision Twist 1813 High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 7/16″ - High-speed steel (hss), for use on a wide variety of materials. Extra-length, for deeper holes. Uncoated (bright), economical and useful with a wide range of drilling applications. 118-degree conventional point angles good for general drilling applications. Round shanks can be used with a variety of tool-holding systems.
Precision Twist DS 90 Solid Carbide Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 90 Degree Point Angle, 3/16″ - Carbide, for use on abrasive materials and high cutting temperatures. Uncoated (bright), for use with a wide range of drilling materials. Intermediate-length spotting drill bits, for starting holes. Round shanks, for use on a variety of tool-holding systems. 90-degree conventional point angles, for reduced stress on drill’s.
Precision Twist R18 High Speed Steel Jobber Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, #7 (Pack of 12) - 118-degree conventional point angles, for general drilling applications. High-speed steel (hss), for use on a wide variety of materials. Round shanks, for use on a variety of tool-holding systems. Jobber-length drill bits, most common length drill bit, suitable for a wide range of applications. Steam tempering (black oxide) finish, retains cutting fluid and prevents chip to tool welding.
XtremepowerUS Industrial 5pc Cobalt Uni Step Bits 1/4″, 3/8″ shank Spiral Flute Drill Bit Set Split Point SAE - 3/16″ to 7/8″ 12 steps (3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″). 3/16″ to 1/2″ 6 steps (3/16″, 1/4″, 5/16″, 3/8″ 7/16″, 1/2″). 1/4″ to 3/4″ 9 steps (1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″). 1/8″ to 1/2″ 13 steps (1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″). 1/4″ to 1-3/8″ 10 steps (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″).
Precision Twist R51 High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1″ - Uncoated (bright) finish, economical and useful with a wide range of drilling applications. High-speed steel (hss), for use on a wide variety of materials. 118-degree conventional point angles good for general drilling applications. Long length (also called taper length) drill bits have longer flutes and overall lengths than jobber drill bits. Round shanks can be used with a variety of tool-holding systems.
Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 9/16″ - Gold oxide, retains cutting fluid and prevent chip to tool welding. Short-length, for better rigidity and increased strength. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. 135-degree split point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. Round shanks, for use on a variety of tool-holding systems.
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 1/4″ Size, 2-1/2″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, cast iron and steel. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/8″ Size (Pack of 1) - Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for non-ferrous material, stainless steel and hardened steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Kodiak Cutting Tools KCT140314 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 7/8″ Length of Cut, 2″ Overall Length, 3/16″ Diameter - 3/16 inch diameter solid carbide drill, straight flute 7/8″ length of cut 2″ overall length 2 flute straight flute drill bit, carbide. .
Precision Twist R40 High Speed Steel Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 9/16″ - 118-degree conventional point angles good for general drilling applications. Short-length drill bits, also called stub length, provide better rigidity and increased strength. Round shanks can be used with a variety of tool-holding systems. High-speed steel (hss), for use on a wide variety of materials. Uncoated (bright), economical and useful with a wide range of drilling applications.
Gray 17mm Cutting Diameter High Speed Steel Taper Shank Twist Flute Drill Bit - Product name taper shank twist drill bitmaterial hsscutting diameter 17mm/ 066″. 225mm/ 88″ 225mm/ 88″total weight 238g. Shank maxdiameter 18mm/ 07″shank length(include tang) 80mm/ 31″tang size 13 x 13 x 6mm/ 05″ x 05″ x 02″ (lwt). Package content package content1 x taper shank twist drill bit 1 x taper shank twist drill bit. Neck size 11 x 15mm/ 04″ x 059″ (ld)flute length 127mm/ 5″total length total length.
uxcell 20mm Cutting Diameter HSS Taper Shank Twist Flute Drill Bit - Flute length 138mm/ 54″total length total length. 240mm/ 94″ 240mm/ 94″total weight 323g. Package content package content1 x taper shank twist drill bit 1 x taper shank twist drill bit. Shank maxdiameter 17mm/ 07″shank length(include tang) 93mm/ 37″tang size 13 x 13 x 6mm/ 05″ x 05″ x 02″ (lwt). Product name taper shank twist drill bitmaterial hsscutting diameter 20mm/ 079″.
Cobra Carbide 32396 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 7/32″ Size, 2-3/8″ Length (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection. Round shanks allow use with a wide variety of toolholding systems.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.